This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Neponset + CF on Redboot
- From: Srijon Biswas <srijon at innvo dot com>
- To: todd dot kallam at acterna dot com
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Thu, 03 Jan 2002 13:50:48 +0800
- Subject: Re: [ECOS] Neponset + CF on Redboot
- References: <C1256B35.0058D365.00@magnus.eni.wago.de>
todd.kallam@acterna.com wrote:
>
> Hi,
>
> I have an Assabet/Neponset running with Redboot.
> The Socket CF card only seems to work when inserted
> in the CF slot on the Assabet, not in the PCMCIA
> slots on the Neponset. I have phase 5 hardware.
>
> After I boot Linux, I use the ethernet chip set on
> the Neponset board because Linux does not seem to
> support the Socket CF card. I don't think that
> Ecos supports the ethernet chip set on the Neponset.
>
> You also need to make sure that you added the following
> lines to redboot_ROM.ecm or other configuration if you
> are using the Neponset:
>
> cdl_option CYGSEM_HAL_ARM_SA11X0_ASSABET_NEPONSET_TIMINGS {
> user_value 1
> };
>
> I hope this helps.
>
> Todd
>
Thanks a lot...
I'll try this out and let you know the result.
Srijon
--
|--------------------------------|
| Srijon Biswas |
| srijon@innvo.com |
| srijon_biswas@yahoo.com |