This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

How do i download the VxWorks image


Hi, folks
I am currently working on an Intel IQ80310 IOP board and need to downlaod
the VxWorks image bootrom.bin provided on to the on-board flash
unfortunately the board manual doesnt describe the memory location /
address where i need to put in the image for proper execution of the same.

the board has redboot as the boot monitor, and i need to use the FRU (
flash recovery utility ) provided by the intel people to download the
image ( redboot as well as any other, for eg: vxwrks ) onto the on board
flash via the PCI interface of the PC to which the board is connected.

but i guess i need to downlaod the image to a specified address of the
flash as there is a rotary switch setting provided on the board if the
image downlaoded is of vxworks, but the manual doesnt give the address of
the same

any idea where i need to download the image of vxworks ? in case any one
has dealt with such similar prob before ? I am unable to get any support
from wrs / intel on the same :(

also usualy how is the memory mapped for the flash ...? redboot shows some
info when i enter fis list & fis free, but i am confused ... can someone
tell me how is the memory mapping present betn the flash and the onboard
32MB RAM ?

Thanx,
deepak

[ "To steal ideas from one person is plagiarism,
to steal ideas from many is research." ] -Anon.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]