This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
loading ecos application on Redboot via GDB
- From: "satish s mantri" <satish_mantri at rediffmail dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: 25 Jan 2002 12:55:53 -0000
- Subject: [ECOS] loading ecos application on Redboot via GDB
- Reply-to: "satish s mantri" <satish_mantri at rediffmail dot com>
Thanks for the support.
As per your instruction i have done the following
1.we booted our i386(Target) with RedBoot.
2.Our host was on Linux.
3.We run GDB on the Host with following commands
i)cd BASE_DIR/install/tests/kernel/v1_3_1/tests
ii) i386-elf-gdb -nw thread_gdb
iii) set remotebaud 38400
iv) target remote /dev/ttyS1
Got the response as
Remote debugging using /dev/ttyS1
0x7f38 in ?? ( )
at/opt/ecos/ecos-1.3.1/packages/hal/i386/pc/v1_3_1/src/hal_startup.c : 104
104 }
v) load
Got the response as
loading section .text, size 0x6db4 lma 0x10000
Ignoring packet error, continuing......
Ignoring packet error, continuing......
Ignoring packet error, continuing......
Note: We are using ecos version 1.3.1 So we dont have prebuilt in th BASE_DIR.
So we have given the path for cd BASE_DIR/install/tests/kernel/v1_3_1/tests
We are having the prebuilt in the component repository and not in Build/install tree.
Kindly guide how to load and execute an ecos application using gdb.
Why we are getting the ignoring packet error after load command??
Thnx in anticipation,
Satish