This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: i386 RedBoot serial
- From: "Ecer, Jiri" <jecer at Rational dot Com>
- To: "'McAtee, Kip'" <Kip dot McAtee at SpirentCom dot COM>, "'ecos-discuss at sources dot redhat dot com'" <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 7 Feb 2002 09:59:56 -0500
- Subject: RE: [ECOS] i386 RedBoot serial
Kip,
I did have the same problem, but everything worked fine once I switched from
Hyperterm to a different terminal program. Perhaps there are some options in
Hyperterm that make this work as well?
Jiri
-----Original Message-----
From: McAtee, Kip [mailto:Kip.McAtee@SpirentCom.COM]
Sent: February 6, 2002 10:03 PM
To: 'ecos-discuss@sources.redhat.com'
Subject: [ECOS] i386 RedBoot serial
Greetings-
I've successfully booted from the pre-built i386 RedBoot
binary to the RedBoot> prompt, but the keyboard and the
COM1 port don't accept input on several PCs.
I'm using Hyperterm at 38400,8,N,1,none with a null
modem cable. I see the boot messages (June 8, 2001 build)
and the Redboot> prompt on both the video and the COM1
port. Should I try a different terminal program?
My compliments and appreciation-
Kip