Re: [ECOS] Redboot Image download via Network...

["venkatesh" <venkatc at in dot ceeyes dot com>]

Sir,
I refered to the link specified by You, and there it is said to use the
command fconfig.
But, if I type help from the redboot prompt fconfig is not listed.
So where shall I use this fconfig.And also, How to configure the target to
use BOOTP?
Kindly help in this regard

Thanks in Advance,
Krishna Mohan.

----- Original Message -----
From: Jesper Skov <jskov@redhat.com>
To: venkatesh <venkatc@in.ceeyes.com>
Cc: eCos mailing list <ecos-discuss@sources.redhat.com>
Sent: Wednesday, February 13, 2002 6:36 PM
Subject: Re: [ECOS] Redboot Image download via Network...


> On Wed, 2002-02-13 at 13:31, venkatesh wrote:
> >
> >
> >  Hi,
> >  I built redboot.bin successfullly using ecos1.3.1 and with config tool
> >  1.3.net.  My platform is i386 PC.  I am working with cygwin on win2k.
> >  My intention is to load and execute the hello.exe image through
network.
> >  My target PC has  a Intel Pro 82559 NIC card.
> >   Now when I boot the i386 PC with the dd'd redboot floppy it is
displaying
> > the following...
> >
> >  [snip]:
> >  "Ethernet eth0 : MAC address: 00:02:b3:20:05:34.
> >  Can't get BOOTP info for device !"
> >
> >  Now How to get BOOTP enabled ?
> >  Is BOOTP required for network debugging?
> >  How to enable my target PC thro network via DHCP.
>
> Please see http://sources.redhat.com/fom/ecos?file=77
>
> Jesper
>
>
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
>


Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss