Re: [ECOS] Bootable of ecos

["Ram Khatkhedkar (enSys)" <gccram at yahoo dot com>]

> From: Jesper Skov <jskov@redhat.com>
> To: Nilesh Tarale <ntatensoft@yahoo.com>
> Cc: eCos Discuss <ecos-discuss@sources.redhat.com>
> Sent: Monday, March 11, 2002 12:49 PM
> Subject: Re: [ECOS] Bootable of ecos
>
>
> > On Wed, 2002-03-06 at 14:46, Nilesh Tarale wrote:
> > > Hi All,
> > > I have done some application with serial test. I have
> > > created an image for i386-pc from ecos-v1.3.1.
> > > Then created a binary file for that application. and a
> > > bootable floppy is working fine. But the same
> > > application when compiled with the ecos code from cvs
> > > the bootable floppy is getting created but not
> > > displaying anything..
> > > Please guide....
> >
> > Build RedBoot and boot it. Build application for RAM startup, download
> > it to the PC, and debug it.
> >
> > Jesper
> >
> Thanx for the reply..
> But my poblem is little different..
> I have created a redboot bootable floppy for ecos-1.3.1, as well as for
> ecos-cvs.
> Then i have created an image with FLOPPY startup for i386-pc .
> Wrote one simple application by the name of calculator.
>  I have complied and debug it though redboot. Created a binary file out of
> the object file of the calculator. Then created a bootable floppy with
this
> binary..
> It is woking fine...
> When the same application is complied in the image for i386-pc of
ecos-cvs,
> with same configuration and FLOPPY startup as in ecos-1.3.1. I have
created a
> binary of calculator's object file. After booting the pc with this
bootable
> the pc gets booted but it does't show anything on the screen...
> Please Guide....
> Thanx
> Nilesh Tarale
>
>
>
>
>


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss