This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
can not get connected by gdb
- From: joan_x <joan_x at sina dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: Tue, 16 Apr 2002 10:36:39 +0800
- Subject: [ECOS] can not get connected by gdb
Hi all:
I use floppy to boot ecos up from x86 target,
when boot, it displays this:
++$T0508:3c390000;04:e00f0000:#1c
Does this mean the target has boot up?
But after that I find the target halted, keyboard
got no response when I hit it.
And at the host, I use gdb to connect it:
set remotebaud 38400
target remote /dev/ttyS1
But not succeed,it shows:
Ignoring package error(3 times)
I don't know why. The serial cable is ok, I have
used minicom to transfer, everything is ok.
I have read the previous article on this mailing
list, but didn't get answer.
Thanx
Joan
______________________________________
===================================================================
新浪免费电子邮箱 (http://mail.sina.com.cn)
新浪分类信息:二手市场走一走,该出手时就出手! (http://classad.sina.com.cn/2shou/)
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss