This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: How to add new commands in RedBoot
- From: "Stephen Goadhouse" <stephen dot goadhouse at adiengineering dot com>
- To: <ecos-discuss at sources dot redhat dot com>
- Cc: "Prashant M Naik" <prashant dot naik at wipro dot com>
- Date: Thu, 25 Apr 2002 21:59:06 -0400
- Subject: RE: [ECOS] How to add new commands in RedBoot
An excellent place to start, as I recently discovered, is to look at how the
iPAQ is done. Under hal/arm/sa11x0/ipaq/current/src there is a file named
redboot_cmds.c. Take a look at it. Also, look at the cdl file for the ipaq
HAL. It shows how to make sure the redboot_cmds.c file gets compiled.
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/ Stephen Goadhouse Work: (434) 978-2888 x6 _/
_/ Staff Engineer stephen.goadhouse@adiengineering.com _/
_/ ADI Engineering http://www.adiengineering.com _/
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
> -----Original Message-----
> From: ecos-discuss-owner@sources.redhat.com
> [mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Prashant M
> Naik
> Sent: Thursday, April 25, 2002 10:33 AM
> To: ecos-discuss@sources.redhat.com
> Subject: [ECOS] How to add new commands in RedBoot
>
>
> Hi,
>
> I ported the RedBoot for my board. Now I want to add some test commands
> for my pheripheral devices on board. How can I do that?
> I want these tests to be part of RedBoot code which I am going flash it
> in the ROM at once and test it through UART.
> Normally in which directory I need to keep these test files ? And Should
> I follow same build steps as given in RedBoot User's Guide [ Chapter 3 -
> Rebuilding RedBoot]
>
> thank you
> prashant
>
>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss