This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Data section in redboot
- From: "Agarwal, Lomesh" <lomesh dot agarwal at intel dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: Thu, 23 May 2002 11:51:29 -0700
- Subject: [ECOS] Data section in redboot
I have a dual processor board and I need to copy data section from ROM of
first processor to RAM of another processor after I jump to C Code (at this
point I am running out of RAM of first processor and everything is copied to
RAM). So I am using __rom_data_start, __ram_data_start, __ram_data_end
defined in vectors.s
I defined all these 3 as extern in my C code and when I access these values
of these are 0. I tried using .__rom_data_start, .__ram_data_start,
.__ram_data_end but compiler gives me error. I checked the values when I use
them in vectors.s and the values seems to be ok (at this point also I am
running out of RAM of first processor and everything is copied to RAM). But
I don't find the same value later.
So, the question is how can I access these.
Thanks,
Lomesh
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss