RE: [ECOS] Porting ecos 2.0 to CDB89712

["Ray Bozorg" <rayb at micro-bit dot com>]

Gary,
The board has 16M RAM.
No there is no LCD on Board but It does have all the connection to connect
an external LCD to it.  Which I have done that.
Where can I get info on the SEB238.  I searched the net and did not find
anything on this.  Is this Cirrus Logic Part Number?

Thanks
Ray Bozorg

-----Original Message-----
From: Gary Thomas [mailto:gary@chez-thomas.org]
Sent: Thursday, June 13, 2002 8:34 AM
To: Ray Bozorg
Cc: eCos Discussion
Subject: Re: [ECOS] Porting ecos 2.0 to CDB89712


On Thu, 2002-06-13 at 07:16, Ray Bozorg wrote:
>
> I am trying to port eCos 2.0 for CS89712 processor and eval board CDB89712
> from
> Cirrus Logic.
> I have a very old patch that I am trying to use.
> The question is that about the memory layout.
> For EDB7312, for example ram portion (file: mlt_arm_edb7312_ram.h) see
> attached.
> Now I need to convert the mlt_arm_cdb89712_ram. file see attached to look
> like the 7312 but I am not sure how to calculate or convert the
> #define CYGMEM_SECTION_heap1_SIZE (0xfd0000 - (size_t) CYG_LABEL_NAME
> (__heap1))
> I am not sure where the 0xfd0000 came from can anyone help me on this
issue?
>

It came from 16M RAM, minus space for an LCD panel and the MMU tables.

How much RAM is on your new board?
Does it have an LCD panel?

Note: you might want to look at the ep7312 support (SEB238) which is
probably much closer to anything else for what you are doing.



-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss