This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Flash programming AMD800B lock and unlock problem
- From: "Khasim" <khasim at iwavesystems dot com>
- To: <ecos-discuss at sources dot redhat dot com>
- Date: Fri, 2 Aug 2002 22:03:32 +0530
- Subject: [ECOS] Flash programming AMD800B lock and unlock problem
- Organization: iWave Systems Technologies Pvt Ltd
- Reply-to: "Khasim" <khasim at iwavesystems dot com>
Hi
Greetings
I have ported the AMD800B flash driver to MPC860 based board.
I want to enable flash lock and unlock. How to enable this. In fis help
lock and unlock is displayed.
Once I program the flash those sectors are protected.
If I have to program again what should I do.
Please reply
With regards
Khasim.
DISCLAIMER:
This e-mail and any attachment (s) is for authorised use by the intended recipient (s) only. It may contain proprietary material, confidential information and/or be subject to the legal privilege of iWave Systems Technologies Private Limited. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from retaining, using, copying, alerting or disclosing the content of this message. Thank you for your co-operation.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss