This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Redboot Baud Rate
On Thu, 2002-08-08 at 13:36, Craig Vanderborgh wrote:
> Hello Gary:
>
> Just thought you should know: Although I can set the baud rate
> with the "baud" command and it works correctly for the duration of
> a Redboot "boot", upon reset it reverts to 38400 even though the
> "fconfig" parameters have it recorded as 115200.
>
Thanks, I'll check that. I'll also check on the documentation.
> regards,
> craig
>
> Gary Thomas wrote:
> >
> > On Thu, 2002-08-08 at 12:10, Craig Vanderborgh wrote:
> > > Hello All:
> > >
> > > Is it possible to change the baud rate for the Redboot serial console?
> > > I am running on an iPAQ H3760, and the baud rate is currently 38400.
> > > If I try to set it to 115200 using "fconfig", the new value is
> > > accepted, but never honored, even on reset. What's the deal?
> > > Is it not possible to set the baud rate to 115200?
> >
> > Did you try the 'baud' command? I just tried it, using a
> > version I recently built, and it seemed to work fine:
> >
> > RedBoot> bau
> > Baud rate = 38400
> > RedBoot> bau -b 115200
> > Baud rate will be changed to 115200 - update your settings
> > Switched terminal to run at 115200 here
> > Baud rate changed to 115200 - continue (y/n)? y
> > Update RedBoot non-volatile configuration - continue (y/n)? n
> >
> >
> > --
> > ------------------------------------------------------------
> > Gary Thomas |
> > eCosCentric, Ltd. |
> > +1 (970) 229-1963 | eCos & RedBoot experts
> > gthomas@ecoscentric.com |
> > http://www.ecoscentric.com/ |
> > ------------------------------------------------------------
--
------------------------------------------------------------
Gary Thomas |
eCosCentric, Ltd. |
+1 (970) 229-1963 | eCos & RedBoot experts
gthomas@ecoscentric.com |
http://www.ecoscentric.com/ |
------------------------------------------------------------
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss