This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Fw: Re: Re: eb40a RIP
- From: "Lin Ming" <lm1121 at yeah dot net>
- To: Ecos-List (E-mail) <ecos-discuss at sources dot redhat dot com>
- Date: Wed, 28 Aug 2002 9:20:46 +0800
- Subject: [ECOS] Fw: Re: Re: [ECOS] eb40a RIP
- Reply-to: lm1121 at yeah dot net
I'm running an application with set leds and do serial port communication.
I build the default library with your EB40A port(successfully). Then make my app
with the library. The arm-elf-gcc version is 3.0.1. I use insight GDB with GUI and
load the program and run. Then the error info shows.
Must I use the redboot built from your port, too? I use the redboot from other places,
anyway it can work with the app not built from ecos. Any clues for this problem?
Thanks!
Best Regards,
Lin Ming
2002-08-28
>======= 2002-08-27 08:50:00 YOU WROTE:=======
>
>>Lin Ming wrote:
>>> When I run gdb with the EB40 application, gdb shows error message:
>>>
>>> "Program received signal SIGTRAP, Trace/breakpoint trap"
>>>
>>> What's the problem?
>>
>>It's hard to tell without more information. What are you
>>running? redboot? your own app? How did you build it?
>>What version of gcc, binutils, etc. are you using? What
>>command did you issue in gdb to cause this error?
>>
>>-tim
>>
>>.
>
>= = = = = = = = = = = = = = = = = = = =
>
= = = = = = = = = = = = = = = = = = = =
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss