This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Re: sid uart1 displays hex output


CYGSEM_HAL_DIAG_MANGLER

 Andrew

On Tue, Sep 24, 2002 at 08:50:36AM -0400, Frank Ch. Eigler wrote:
> Hi -
> 
> On Tue, Sep 24, 2002 at 06:28:40PM -0700, T Satish Kumar wrote:
> > Hi,
> > When i run the program using the sid. i get the output in the form of
> > hex code on the System monitor's uart1 output window pane !
> >    How can i get to see the output in its original format i.e for eg: 
> > if the output to be displayed is "Hello" in the printf() function..
> > the uart1 window pane displays 48656C6C6F
> > [...]
> 
> It turns out that this question rightfully belongs to eCos, not to SID.
> The eCos libraries sometimes believe that they have a console connection
> to GDB instead of a raw tty, and therefore encode output in gdb's remote
> protocol $O packets.  You need to tell eCos not to do this encoding for
> console output.  I don't recall how to do this - it may be an ecosconfig
> option.
> 
> - FChE



-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]