Re: [ECOS] Re: sid uart1 displays hex output

["T Satish Kumar" <satish at td dot idc dot lsi dot sanyo dot co dot jp>]

well, previously i was using ecos 1.3.1..but later when i tried the same
using ecos 2.0..
this time..i m not able to see even the Hex equivalent of the original
string format ..
i disabled both the options and built the ecos library:
eCos HAL->ROM Monitor support->Work with a ROM Monitor to Disabled
(unchecked)

eCos HAL->Platform-independent HAL options->Route diagnostic output to debug
channel to Disabled (unchecked)

but still therez no output string seen in the uart1 of the system monitor
window.

what could be the problem...?

satish



----- Original Message -----
From: "Gary Thomas" <gthomas@ecoscentric.com>
To: "Frank Ch. Eigler" <fche@redhat.com>
Cc: "T Satish Kumar" <satish@td.idc.lsi.sanyo.co.jp>;
<sid@sources.redhat.com>; "eCos Discussion"
<ecos-discuss@sources.redhat.com>
Sent: Tuesday, September 24, 2002 5:56 AM
Subject: Re: [ECOS] Re: sid uart1 displays hex output


> On Tue, 2002-09-24 at 06:50, Frank Ch. Eigler wrote:
> > Hi -
> >
> > On Tue, Sep 24, 2002 at 06:28:40PM -0700, T Satish Kumar wrote:
> > > Hi,
> > > When i run the program using the sid. i get the output in the form of
> > > hex code on the System monitor's uart1 output window pane !
> > >    How can i get to see the output in its original format i.e for eg:
> > > if the output to be displayed is "Hello" in the printf() function..
> > > the uart1 window pane displays 48656C6C6F
> > > [...]
> >
> > It turns out that this question rightfully belongs to eCos, not to SID.
> > The eCos libraries sometimes believe that they have a console connection
> > to GDB instead of a raw tty, and therefore encode output in gdb's remote
> > protocol $O packets.  You need to tell eCos not to do this encoding for
> > console output.  I don't recall how to do this - it may be an ecosconfig
> > option.
>
> This program (eCos application?) thinks that this output is being handled
> by GDB.  Turn it off by disabling CYGSEM_HAL_USE_ROM_MONITOR and
rebuilding
> the application.
>
> --
> ------------------------------------------------------------
> Gary Thomas                  |
> eCosCentric, Ltd.            |
> +1 (970) 229-1963            |  eCos & RedBoot experts
> gthomas@ecoscentric.com      |
> http://www.ecoscentric.com/  |
> ------------------------------------------------------------
>
>


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss