RE: [ECOS] please help in ecos build

["sanjeev" <sanjeev dot rath at iap-online dot net>]

Thanks Mr. Andrew for the initial guidance.
i tried building ecos for ARM  using cygwin and configuaration tool on
windows.
i am extracting the arm-elf-gcc from cygwin.
After setting the template as Aeb-2 when i try building using  Build|Library
(F7) in configuration windows it gives the error message as follows.
Execution of command 'make -j1 directory "ecos-d/config1_build" failed(error
2:The system can not find the file specified)

I think its not getting the ecos erepository to build which is located on
"D:/ecos-source/ecos/" path.

Please help in screwing the problem.
thanks
Sanjib



-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com
[mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Andrew Lunn
Sent: Thursday, September 26, 2002 1:14 PM
To: sanjeev
Cc: ecos-discuss@sources.redhat.com
Subject: Re: [ECOS] please help in ecos build


On Thu, Sep 26, 2002 at 10:03:46AM +0530, sanjeev wrote:
> Hi,
> i am gettig to notice a lot of queries stating problems when installing
> ecos.

Actually, its a little more specific than that. Its people have
problem installing eCos on M$ platforms. It can be made to work, but
life is much easier if you swap to Linux.

The link you want is:

http://sources.redhat.com/ecos/getstart.html

>From there, there is two links, one for M$ and one for Linux.

     Andrew


 Can anybody give the link to the whole installation procedure to
> follow so that everybody can benefit? i am trying to make ecos workfor the
> first time. I intend to run it on ARM7TDMI and my host system is win2k.
> I have downloaded the following things, but not yet started with the
> installation and build procedure.Waiting for a comprehensive procedure
from
> someone for me to follow.
> Resources downloaded.
> 1. MS vc++ installed
> 2. wxWindows from ftp://sources.redhat.com/pub/ecos/ct2
> 3. latest ecos source from www.ecoscentric.com/snapshots
> 4. cygwin
> 5. TCl/Tk 8.2

8.2 is too old. You need at least 8.3

> 6. configtool-2.0-setup.exe from ftp://sources.redhat.com/pub/ecos/ct2

If you have this, you probably don't need VC++ and wxWindows. You only
need those if you want to build the config tools from sources on M$
platforms.

        Andrew

--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss