This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Ethernet on E7T
- From: NHibberd at aol dot com
- To: ecos-discuss at sources dot redhat dot com
- Date: Sun, 29 Sep 2002 16:21:43 EDT
- Subject: [ECOS] Ethernet on E7T
Hi there,
I am attempting to get ethernet and TCP/IP up and running on
my Arm E7T board with a 'tacked on' STE100P PHY device.
So far, using the Samsung ks32c5000/s3c4510 ethernet
driver and having tried both lwip (eCos 1.3.net) and freeBSD
(eCos 2.11) networking stacks, I have not been able to
successfully ping the board.
By monitoring the ethernet BDMA IO registers, I know that the
MAC/PHY is successfully receiving frames because I
am able to view the contents of the ethernet data frames
when they are transferred to RAM.
Are there any special tweaks that I need to do to get the
networking stack (or driver) operational?
Thanks,
Neil
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss