This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
asking for help
- From: narendra babu <anbabu01 at yahoo dot com>
- To: Andrew Lunn <andrew dot lunn at ascom dot ch>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Wed, 13 Nov 2002 06:42:16 -0800 (PST)
- Subject: [ECOS] asking for help
sir,
Thank you very much for your reply, As you told we
need to start ymodem before
we go to minicom, so that I was installed lrzsz
package in my system and trying to
start ymodem, how to start ymodem before we go to
minicom? As we don't know that
much about this, can you please suggest us how to
use this ymodem in minicom and
make files download to target.
please give us reply, we will wait for your
valuable reply to proceed further.
With regards,
Narendra Babu.
--- Andrew Lunn <andrew.lunn@ascom.ch> wrote:
> > At this point, interrupt the Angel session and
> start
> > minicom.
> > RedBoot> ve
> > RedBoot(tm) bootstrap and debug environment,
> version
> > UNKNOWN - built 14:
> > Platform: Atmel AT91/EB40 (ARM7TDMI)
> > Copyright (C) 2000, 2001, Red Hat, Inc.
> > RAM: 0x02000000-0x02080000, 0x020116d8-0x0207fd00
> > available
> > FLASH: 0x01010000 - 0x01020000, 256 blocks of
> > 0x00000100 bytes each.
> > RedBoot> load -m ymodem -b 0x02040000
>
> At this point you need to start your ymodem download
> from the host.
>
> > CCCCCCCCC........can't load: Timed out
>
> These C's are the target trying to handshake with
> ymodem on the
> host. Since you have not started ymodem, it fails...
>
> Andrew
__________________________________________________
Do you Yahoo!?
U2 on LAUNCH - Exclusive greatest hits videos
http://launch.yahoo.com/u2
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss