This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: conflicts problem
- From: Yin Bao <yin dot bao at biometricsolutions dot com>
- To: narendra babu <anbabu01 at rediffmail dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Wed, 20 Nov 2002 12:50:00 -0500
- Subject: Re: [ECOS] conflicts problem
- References: <20021119144742.25215.qmail@webmail8.rediffmail.com>
I cannot help you directly but ecos 1.3 is very old and you might want
to use the latest ecos from CVS. To share my experience, even with
the latest ecos I got similar conflicts when trying to build gdb stubs,
I didn't
investigate too much since I ended up using redboot, which seems to
be recommended more. I had to rebuild it for my platform though.
Yin
narendra babu wrote:
sir,
We are using Atmel AT91 Evaluation Board(EB40), I am trying to map
$BASE_DIR/loaders/arm-aeb/gdb_module.img to board
like
arm-elf-geb gdb_module.img
But it is showing like loading section .rom_vectors, size lma 0xc000
after that it is hanging, I think it may memory layout problem.How
to solve
this problem? how to create our own gdb_module.img by selecting
target and others,
I tried to create my own gdb_module.img, gdb_module.bin,.....like
that by giving
option like
ecosconfig new aeb stubs
ecosconfig tree
make
in the making it showing error like
/opt/ecos/ecos-1.3.1/packages/install/lib/libtarget.a(kernel_intr.o):/opt/ecos/ecos-1.3.1/packages/kernel/v1_3_1/src/intr/intr.cxx:649
: undefined reference to `hal_interrupt_stack_call_pending_DSRs'
collect2: ld returned 1 exit status
make[1]: ***
[/opt/ecos/ecos-1.3.1/packages/install/bin/gdb_module.bin] Error 1
can anyone help to make it succuess
2)
when I was trying to type like this
ecosconfig new aeb stubs
it is showing like this
5 conflict(s) resolved:
CYGBLD_BUILD_GDB_STUBS:
Requires constraint not satisfied: CYG_HAL_STARTUP == "ROM"
CYGBLD_BUILD_GDB_STUBS:
Requires constraint not satisfied: CYGSEM_HAL_ROM_MONITOR
CYGBLD_BUILD_GDB_STUBS:
Requires constraint not satisfied:
CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
CYGBLD_BUILD_GDB_STUBS:
Requires constraint not satisfied: !
CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
CYGBLD_BUILD_GDB_STUBS:
Requires constraint not satisfied: !
CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
how to avoid these conflicts ?
can anyone explain what is the exact procedure after creating
.exe(arm executable), how
to run on board and how to cross check?
Thanks in advance,
with regards,
Narendra Babu.
Narendra Babu.A
Engineer-Design Development,
iPlayNetworks(Pvt)Ltd,
3-6-157/A, Himayat Nagar,
Hyderabad - 500029,A.P.India,
Phones-(040)-3225204,3226714
--
Yin Bao
Senior Software Engineer
Biometric Solutions LLC
805 Third Avenue, Suite 1500
New York, NY 10022
Office: 212-317-8308
Fax: 212-317-8055
yin.bao@biometricsolutions.com
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss