This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: problem after telnet to target
- From: Shivaji Navale _01307908 <shivaji at ee dot iitb dot ac dot in>
- To: eCos Discussion <ecos-discuss at sources dot redhat dot com>
- Date: Fri, 20 Dec 2002 21:22:27 +0530 (IST)
- Subject: Re: [ECOS] problem after telnet to target
can someone help me on this issue.
On Thu, 19 Dec 2002, Shivaji Navale _01307908 wrote:
> Hi,
>
> We prepared redboot bootable binary from latest CVS.
> after telnet to i486 target, we got the redboot prompt.
> But there was no response for any commands.
> The target was able to be ping'ed.
> However, when on target console all was fine.
> The connection times out for gdb (ethernet) for the same target.
> when using the prebuilt binary obtained from redhat source page, all
> worked fine.
> But when using the same boot image on another i486 target,
> didnt give above problems.
>
> PS: target when pinged by packet size > 150 bytes doesn't respond,
> this happened also for the bin image from redhat source page.
>
>
>
> thanks
>
> shivaji...
>
>
> --The World is the manifestation of our inner state
>
>
>
>
> --
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss