This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: How to fill the PCI ID?
- From: Jonathan Larmour <jifl at eCosCentric dot com>
- To: Wang Anthony <wang_anthony at hotmail dot com>
- Cc: eCos discussion <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 09 Jan 2003 06:10:44 +0000
- Subject: [ECOS] Re: How to fill the PCI ID?
- References: <F95ye1gZ9lEchW71qh1000294cc@hotmail.com>
Wang Anthony wrote:
> Hi, Jonathan:
> I have run the pci1 test. Please tell me what to fill to where for
> PCI ID?
>
> Thanks,
> Anthony
> Following is the result from PCI1 test:
>
> Found device on bus 0, devfn 0x48:
> Note that board is active. Probed sizes and CPU addresses invalid!
> Device configuration succeeded
> Vendor 0x8086 [Intel][Intel Corporation]
> Device 0x1229 [82557/8/9][Fast Ethernet LAN Controller]
That should have been recognised correctly. If it wasn't, I'm not sure
what's wrong. Does it definitely not work with a rebuilt RedBoot image?
Jifl
--
eCosCentric http://www.eCosCentric.com/ <info@eCosCentric.com>
--[ "You can complain because roses have thorns, or you ]--
--[ can rejoice because thorns have roses." -Lincoln ]-- Opinions==mine
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss