This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: global addressing in ecos
- From: Mark Salter <msalter at redhat dot com>
- To: jifl at eCosCentric dot com
- Cc: gary dot thomas at mind dot be, imdeveza at hotmail dot com, ecos-discuss at sources dot redhat dot com
- Date: Thu, 9 Jan 2003 11:30:28 -0500 (EST)
- Subject: Re: [ECOS] global addressing in ecos
>>>>>On Wed, 2003-01-08 at 04:53, matthew de veza wrote:
>>>>>
>>>>>>we've been testing an ecos target with the tahi test suite and the tests
>>>>>>which involves autoconfiguration of global addresses seem to all be
>>>>>>unsuccessful. i would really like to find out if the global address
>>>>>>autoconfiguration feature/stateless address autoconfiguration feature which
>>>>>>was ported from freebsd to ecos has been fully ported and is robust and
>>>>>>functional. can anyone please help me?
This patch cleared up a lot of TAHI failures for us:
http://sources.redhat.com/ml/ecos-patches/2002-08/msg00078.html
AFAICT, all of our patches are in the public CVS.
>From a report on the test run:
============================================
IPv6 Stateless Address Autoconfiguration
============================================
Originally failed tests should now pass. Reason: new
ipv6_routing_thread does not emit unexpected packets.
Exempt tests: #21-#30, #54-#56
Reason: Not applicable: Infrastructure missing, no 'ifconfig',
'route' or 'setkey' utilities, so even in manual mode, boot-time
config is not possible in eCos.
--Mark