This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Axiom CMD561 - BDM debugger recommendations please
- From: Scott Dattalo <scott at dattalo dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Wed, 15 Jan 2003 06:35:03 -0800 (PST)
- Subject: RE: [ECOS] Axiom CMD561 - BDM debugger recommendations please
On 15 Jan 2003, Bob Koninckx wrote:
> On Wed, 2003-01-15 at 14:52, Scott Dattalo wrote:
> > On 15 Jan 2003, Bob Koninckx wrote:
> >
<snip>
> > Bob,
> >
> > Have you (or anyone else) tried the LibRemote package with Linux? See the
> > bottom of this page:
> >
> > http://www.ocdemon.com/OCDemonLinux.html
> >
> > I haven't, but I'd be interested to hear from others. It sounds as though
> > if the LibRemote package can make your Wiggler appear (to gdb) as though
> > if it's a attached to an ethernet cable.
>
> No I haven't. But if I read the page correctly, it is only meant to work
> for their raven product and _not_ with the wiggler. I did not see any
> libremote for powerpc either.
Perhaps you're right. However, if you install the RPM and look at the
README in /tmp/OCDeom/arm there is this section:
After installation there should be a driver node /dev/ocdemonpp0.
The libraries will be installed as;
/usr/lib/libraven.so
/usr/lib/libraven.so.1
/usr/lib/libraven.so.1.0
/usr/lib/libwiggler.so
/usr/lib/libwiggler.so.1
/usr/lib/libwiggler.so.1.0
I'm going to try this out soon, but at the moment I have a critical
deadline and literally no time to experiment with this. I also bought two
mpDemons, so getting the Wiggler working is less of a priority.
Scott
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss