This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: running tests - PC
- From: Bart Veer <bartv at ecoscentric dot com>
- To: harmon at hrdcorp dot com
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Thu, 27 Mar 2003 15:24:50 +0000 (GMT)
- Subject: Re: [ECOS] running tests - PC
- References: <003501c2f2e7$f5018580$6601a8c0@goodyear>
>>>>> "Larry" == Larry Harmon <harmon at hrdcorp dot com> writes:
<snip>
Larry> After running a couple dozzen tests I notice most are not
Larry> passing. What am I doing wrong?
Larry> I've attached the output from the tests!
<snip>
Larry> PASS:<pci1 test OK>
<snip>
Larry> PASS:<pci2 test OK>
<snip>
Larry> PASS:<HAL Context test>
...
Larry> (gdb) target remote 192.168.1.222:9000
Larry> 192.168.1.222:9000: Connection timed out.
Larry> (gdb) load
Larry> You can't do that when your target is `exec'
<snip>
Larry> (gdb) target remote 192.168.1.222:9000
Larry> 192.168.1.222:9000: Connection timed out.
Larry> (gdb) load
Larry> You can't do that when your target is `exec'
...
So the first few tests run fine. Then something went wrong on the
target such that gdb could no longer connect to it, and obviously it
was not possible to run the remaining tests. Power cycling or
otherwise resetting the target would seem to be in order.
Bart
--
Bart Veer eCos Configuration Architect
http://www.ecoscentric.com/ The eCos and RedBoot experts
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss