----- Original Message -----
From: "Matt Kober" <mattkober at web dot de>
To: "JonathanLarmour" <jifl at eCosCentric dot com>
Cc: <ecos-discuss at sources dot redhat dot com>
Sent: Sunday, April 13, 2003 11:35 PM
Subject: Re: [ECOS] arm evaluator e7t hangs when executing example progs/tests
I just rebuilt redboot based on the 2.0b1 source code. i got no errors at built
time and after download the redboot module is available but when i try to start it,
it just returns to the e7t BSL boot prompt.
previously, i used a prebuilt image that i downloaded at http://sources.redhat.com/ecos/boards/redbootbins/e7t/ ,which seemed to
work just fine for me.
i really hope i just have a hardware problem, but i don't quite understand why the
prebuilt redboot works then. on the other hand, is it working properly ?
just to rule out the posibillity of a hardware issue, i'll try a different board.
Matt
Did you change the 'Startup Type' from RAM to ROM before building?