This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: MPC860 Port for RedBoot?
- From: rameshs at danlawinc dot com
- To: gary dot thomas at mind dot be
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Fri, 16 May 2003 20:17:40 +0530
- Subject: RE: [ECOS] MPC860 Port for RedBoot?
There is a macro for sci module which is defined only for 860 but not for
850 board.
I dont know weather it is corrected or not.This is mailed to discussion list
3 months back.
(We added this macro for 850 also.We are working for 850 board.If you dont
include this macro some linking errors will get.)
S.Ramesh Chandra.
-----Original Message-----
From: Gary D. Thomas [mailto:gary.thomas@mind.be]
Sent: Friday, May 16, 2003 8:06 PM
To: rameshs@danlawinc.com
Cc: ernie@aztek-eng.com; eCos Discussion
Subject: RE: [ECOS] MPC860 Port for RedBoot?
On Fri, 2003-05-16 at 08:29, rameshs@danlawinc.com wrote:
> Hi,
> You can start with adder board with 860 processor.(There is a
problem
> with 850 processor.)
> This is working finely.
>
What problem with the 850? It works just fine (on a true Adder
from Analogue & Micro which has an 850).
> regds,
> S.Ramesh Chanddra.
>
>
>
> -----Original Message-----
> From: Ernie Biancarelli [mailto:ernie@aztek-eng.com]
> Sent: Friday, May 16, 2003 7:59 PM
> To: ecos-discuss@sources.redhat.com
> Subject: [ECOS] MPC860 Port for RedBoot?
>
>
> Hello list,
>
> I'm about to start a project based around the PowerPC 860 part. Is
> anyone currently working with the PowerPC 860 family? Are the HAL and
> the QUICC drivers solid? Any feedback on your experiences thus far would
> be appreciated.
>
> Also, in the short term, I plan on using the MPC860FADS board to start
> development. The CVS repository has an old port of RedBoot, I think, for
> the board. Has anyone been using this? Got any pointers about how to get
> it up and running?
>
> Thanks in advance,
> Ernie Biancarelli
>
> Boulder, CO
>
>
> --
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
--
Gary D. Thomas <gary.thomas@mind.be>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss