This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: MPC860 Port for RedBoot?
- From: "Gary D. Thomas" <gary dot thomas at mind dot be>
- To: rameshs at danlawinc dot com
- Cc: eCos Discussion <ecos-discuss at sources dot redhat dot com>
- Date: 16 May 2003 09:04:38 -0600
- Subject: RE: [ECOS] MPC860 Port for RedBoot?
- Organization:
- References: <207EE0F3DFEED4119B0100508B441B36A7FA61@agni.dsil.danlawinc.com>
On Fri, 2003-05-16 at 08:47, rameshs@danlawinc.com wrote:
> There is a macro for sci module which is defined only for 860 but not for
> 850 board.
> I dont know weather it is corrected or not.This is mailed to discussion list
> 3 months back.
> (We added this macro for 850 also.We are working for 850 board.If you dont
> include this macro some linking errors will get.)
> S.Ramesh Chandra.
>
eCos & RedBoot build and run fine on the Adder/850.
I can find no record of any posting by you regarding this. Perhaps
you used a different name/address?
>
>
> -----Original Message-----
> From: Gary D. Thomas [mailto:gary.thomas@mind.be]
> Sent: Friday, May 16, 2003 8:06 PM
> To: rameshs@danlawinc.com
> Cc: ernie@aztek-eng.com; eCos Discussion
> Subject: RE: [ECOS] MPC860 Port for RedBoot?
>
>
> On Fri, 2003-05-16 at 08:29, rameshs@danlawinc.com wrote:
> > Hi,
> > You can start with adder board with 860 processor.(There is a
> problem
> > with 850 processor.)
> > This is working finely.
> >
>
> What problem with the 850? It works just fine (on a true Adder
> from Analogue & Micro which has an 850).
>
> > regds,
> > S.Ramesh Chanddra.
> >
> >
> >
> > -----Original Message-----
> > From: Ernie Biancarelli [mailto:ernie@aztek-eng.com]
> > Sent: Friday, May 16, 2003 7:59 PM
> > To: ecos-discuss@sources.redhat.com
> > Subject: [ECOS] MPC860 Port for RedBoot?
> >
> >
> > Hello list,
> >
> > I'm about to start a project based around the PowerPC 860 part. Is
> > anyone currently working with the PowerPC 860 family? Are the HAL and
> > the QUICC drivers solid? Any feedback on your experiences thus far would
> > be appreciated.
> >
> > Also, in the short term, I plan on using the MPC860FADS board to start
> > development. The CVS repository has an old port of RedBoot, I think, for
> > the board. Has anyone been using this? Got any pointers about how to get
> > it up and running?
> >
> > Thanks in advance,
> > Ernie Biancarelli
> >
> > Boulder, CO
> >
> >
> > --
> > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> > and search the list archive: http://sources.redhat.com/ml/ecos-discuss
--
Gary D. Thomas <gary.thomas@mind.be>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss