This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: MPC860 Port for RedBoot?
- From: "Frank Robbins" <frank dot robbins at analogue-micro dot com>
- To: <ernie at aztek-eng dot com>
- Cc: <rameshs at danlawinc dot com>,<ecos-discuss at sources dot redhat dot com>
- Date: Fri, 16 May 2003 19:39:30 +0100
- Subject: Re: [ECOS] MPC860 Port for RedBoot?
- References: <207EE0F3DFEED4119B0100508B441B36A7FA60@agni.dsil.danlawinc.com>
Sometimes advice can be incorrect ..... the adder modules are 850 and 852T
only .....not 860T
and as mentioned before on the list there is no problem with the 850 on the
adder modules.
Regards
Frank Robbins
Analogue & Micro Ltd,
9 Clytha Park Road
Newport
South Wales
NP20 4US
Email : Frank.Robbins@Analogue-Micro.com
Email : Frank@Analogue-Micro.com
http://www.Analogue-Micro.com
Tel: (44) (0)1633 666787
Fax: (44) (0)1633 666788
----- Original Message -----
From: <rameshs@danlawinc.com>
To: <ernie@aztek-eng.com>
Cc: <ecos-discuss@sources.redhat.com>
Sent: Friday, May 16, 2003 3:29 PM
Subject: RE: [ECOS] MPC860 Port for RedBoot?
> Hi,
> You can start with adder board with 860 processor.(There is a
problem
> with 850 processor.)
> This is working finely.
>
> regds,
> S.Ramesh Chanddra.
>
>
>
> -----Original Message-----
> From: Ernie Biancarelli [mailto:ernie@aztek-eng.com]
> Sent: Friday, May 16, 2003 7:59 PM
> To: ecos-discuss@sources.redhat.com
> Subject: [ECOS] MPC860 Port for RedBoot?
>
>
> Hello list,
>
> I'm about to start a project based around the PowerPC 860 part. Is
> anyone currently working with the PowerPC 860 family? Are the HAL and
> the QUICC drivers solid? Any feedback on your experiences thus far would
> be appreciated.
>
> Also, in the short term, I plan on using the MPC860FADS board to start
> development. The CVS repository has an old port of RedBoot, I think, for
> the board. Has anyone been using this? Got any pointers about how to get
> it up and running?
>
> Thanks in advance,
> Ernie Biancarelli
>
> Boulder, CO
>
>
> --
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
> --
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss