Re: [ECOS] fgets problem

[Aaron Richardson <aarichar at cisco dot com>]

Im not on a PC.  Im on an IXP2400 which has an xscale core in it.

thanks,
Aaron


On Friday 27 June 2003 11:35 am, Andrew Lunn wrote:
> > Changing these 3 things causes the serial to stop working all together. 
> > But I get no conflicts.  I did not disable diag serial device driver.
> > I changed /dev/ttydiag to /dev/tty0
> > enable CYGPKG_IO_SERIAL_TTY_TTY0
> > enable CYGPKG_IO_SERIAL_DEVICES
> >
> > Anything I missed?
>
> More likely I missed something!
>
> Err, you say you only have 1 serial port? Maybe you have ser1 and not
> ser0? Do you know which IO port its using? ser0 is 0x3F8 and ser1 is
> 0x2F8. Try enabling ser1, disabling ser0 and mapping tty0 to ser1.
>
> Humm, redboot might be able to tell you which serial port you have. Do
> "channel". I think channel 0 is ser0, channel 1 is ser1 and channel 2
> is the VGA!
>
>        Andrew

-- 


Aaron Richardson
aarichar@cisco.com
512-378-1286


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss