ecos-discuss archive
date index for August, 2003

This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:

August 30, 2003
23:34 Re: MicroWindows is now easier to use Chris Garry
21:39 MicroWindows is now easier to use Gary Thomas
08:34 [Commercial] eCos Professional Developer's Kit Alex Schuilenburg

August 29, 2003
22:38 Re: Testing interrupts ??? Gary Thomas
22:27 Re: Testing interrupts ??? Carlos Camargo
17:47 Re: lwip - Ethernet Savin Zlobec
15:22 RE: ROMRAM start on ARM platform Koeller, T.
15:11 Testing interrupts ??? Matthieu . GIRARDIN
13:49 lwip - Ethernet Stuart Park
08:18 Releasing Code into the Community Retallack, Mark (Siemens)

August 28, 2003
22:42 Re: ROMRAM start on ARM platform Gary Thomas
21:41 Re: ROMRAM start on ARM platform Thomas Koeller
19:08 Re: ROMRAM start on ARM platform Andrew Lunn
18:54 Re: ROMRAM start on ARM platform Gary Thomas
18:46 ROMRAM start on ARM platform Koeller, T.
15:21 Serial upload protocol Doyle, Patrick
15:07 About "File I/O operations via GDB" Vincent Leclaire
14:52 R: Timing with longjmp Michele Portolan
14:29 Re: Timing with longjmp Gary Thomas
14:29 Re: Timing with longjmp Andrew Lunn
14:23 Timing with longjmp Michele Portolan
14:20 Re: Restoring boot/ecos on a AEB-1 using JTAG/Wiggler? Carlos Sobrinho
13:06 Re: eCos or microITRON Grant Edwards
11:27 hello world doesnt run abhijeet mhatre
11:26 Re: Adding a 82544 driver Package to redboot Nick Garnett
11:26 Re: Thread execution time Nick Garnett
11:26 Re: Clock/interrupt latency Nick Garnett
11:17 Re: R: R: Thread execution time Andrew Lunn
10:49 Re: R: R: Thread execution time Gary Thomas
10:44 RE: Clock/interrupt latency Gary Thomas
10:41 Re: Clock/interrupt latency Gary Thomas
10:23 R: R: Thread execution time Michele Portolan
10:12 Re: R: Thread execution time Andrew Lunn
09:55 RE: Clock/interrupt latency Daniel Lidsten
09:50 Re: [porting] Arcom (xScale) Viper card support? Ian Campbell
09:48 R: Thread execution time Michele Portolan
09:46 Re: Clock/interrupt latency Andrew Lunn
09:38 Re: Thread execution time Andrew Lunn
09:32 Clock/interrupt latency Daniel Lidsten
09:17 Thread execution time Michele Portolan
08:14 Re: eCos or microITRON Daniel Morris
07:42 Re: multi-process and virtual memory support..? Andrew Lunn
07:35 multi-process and virtual memory support..? Satish Kumar
07:32 Re: Restoring boot/ecos on a AEB-1 using JTAG/Wiggler? Eric de Jong
06:51 Re: seeking information about power management for eCos Andrew Lunn
05:23 how to debug redboot !! mohanlal jangir
04:22 Question on ITE 8152 PCI Bridge Raghu BK
03:35 Re: eCos kernel image size Gary Thomas
03:06 seeking information about power management for eCos Young Jay
02:48 eCos kernel image size Satish Kumar
02:28 Adding a 82544 driver Package to redboot Muruga Ganapathy
01:13 Re: eCos or microITRON Satish Kumar

August 27, 2003
21:50 Re: interrupt handling -- basic problem? Piotr Trojanek
19:25 Re: [porting] Arcom (xScale) Viper card support? Bob Koninckx
19:23 Re: [porting] Arcom (xScale) Viper card support? Gary Thomas
18:57 Re: [porting] Arcom (xScale) Viper card support? John Wasinger
18:43 Re: [porting] Arcom (xScale) Viper card support? Gary Thomas
18:15 Re: [porting] Arcom (xScale) Viper card support? Gary Thomas
18:09 [porting] Arcom (xScale) Viper card support? John Wasinger
15:07 [EMAIL] Restoring boot/ecos on a AEB-1 using JTAG/Wiggler? Carlos Sobrinho
14:47 Restoring boot/ecos on a AEB-1 using JTAG/Wiggler? Carlos Sobrinho
14:46 Restoring boot/ecos on a AEB-1 using JTAG/Wiggler? Carlos Sobrinho
14:29 Re: Package extractor Grant Edwards
12:49 Re: Random segfaults on REP instructions / i486sx ? Bart Veer
12:02 Re: Package extractor Jonathan Larmour
12:00 Re: eCos or microITRON Alex Schuilenburg
10:22 Re: Package extractor Andrew Lunn
09:39 Re: Major misuse of cyg_bool ? Eric Doenges
08:15 Random segfaults on REP instructions / i486sx ? Vincent Leclaire
08:08 Major misuse of cyg_bool ? Eric Doenges
06:01 trivial question about cpu thumb mode rakesh
04:02 eCos or microITRON Satish Kumar

August 26, 2003
22:12 Re: Re: interrupt handling -- basic problem? Ryan Boder
16:14 PPP Stuart Park
15:57 Re: problem saving application to flash Aaron Richardson
15:20 Re: interrupt handling -- basic problem? amassa at san dot rr dot com
15:14 Re: Slow MPC board? Michael Kelly
15:06 Re: Slow MPC board? Frank Robbins
14:33 Re: Slow MPC board? Michael Kelly
14:31 Re: Slow MPC board? Gary Thomas
14:16 Slow MPC board? Daniel Lidsten
14:15 Re: EP9312 Booting Piotr Trojanek
14:10 EP9312 Booting Jean-Michel Perrin
13:59 RE: Newbie: ECOS hardware ??? Doyle, Patrick
13:18 Newbie: ECOS hardware ??? Lee Davies
12:58 Re: Address Translation macros !! Gary Thomas
12:40 Address Translation macros !! mohanlal jangir
12:39 Re: interrupt handling -- basic problem? Piotr Trojanek
12:14 Re: interrupt handling -- basic problem? Gary Thomas
12:13 eCos and IPSec subin abraham
12:10 Re: interrupt handling -- basic problem? Piotr Trojanek
11:07 reboot from grub Piotr Trojanek
11:04 Re: interrupt handling -- basic problem? Piotr Trojanek
10:39 Re: interrupt handling -- basic problem? Gary Thomas
10:33 interrupt handling -- basic problem? Piotr Trojanek
07:36 SIGTRAP in stack ( ) !!! mohanlal jangir
07:19 Updated serial driver for ecosynth target Savin Zlobec
07:07 please help on memory layout and other questions. Ka Chun, Cheng
02:54 RE: Building toolchains for LEON processor Ren, Han Tao (Hans)

August 25, 2003
22:43 Re: problem saving application to flash Gary Thomas
22:28 problem saving application to flash Aaron Richardson
19:17 TVIA CyberPro 50xx video/graphics IC Kumanan
18:37 Port to Intel IXP1200 Rajesh Gottlieb
17:17 Up to 25 - 80 percent savings on printer products. m inkgc at pr1nting-factory-ware
17:06 Re: Is anyone use the uCnet card on EB40-LS ? Daniel Leu
16:56 RE: ecos port for toshiba tx3927 processor? Rick Davis
15:56 Package extractor Peter Soetens
14:21 Re: ecos and IPSec sandeep
13:49 ecos and IPSec subin abraham
13:01 Tsim with eCos Michele Portolan
12:05 Re: please help on memory layout and other questions. Gary Thomas
11:25 Re: Video mode code / eCos demo David N. Welton
09:57 Re: Context-switch time Piotr Trojanek
09:08 Re: R: Building tests sandeep
08:38 R: Building tests Michele Portolan
07:59 Re: eCos and IPSec sandeep
07:56 Configuration Problem on M5272C3 board Lirondiere, Nicolas
07:24 Re: Building tests sandeep
07:24 why does the framebuffer on i386 vmware is read-only! sonys zhang
06:46 Building tests Michele Portolan
06:38 Is anyone use the uCnet card on EB40-LS ? RandyLin
04:39 please help on memory layout and other questions. Ka Chun, Cheng

August 24, 2003
17:54 Re: MPC750 or MPC604e icanoop
16:15 eCos and IPSec subin abraham
15:33 Re: Video mode code / eCos demo Kumanan
11:35 Re: Video mode code / eCos demo Gary Thomas
00:51 Re: Video mode code / eCos demo Kumanan
00:21 RE: problem in vrc437x/idt79s334a ROMRAM code Andy Dyer

August 23, 2003
22:17 jonson ken johnson ken
21:30 Re: MPC750 or MPC604e Gary Thomas
21:11 Re: Context-switch time Andrew Lunn
19:53 Re: RedBoot + Configuration tool 2.11 question Muruga Ganapathy
16:49 MPC750 or MPC604e Ryan Boder
15:21 Re: ecos ram filesystem Gary Thomas
15:08 ecos ram filesystem mailsagr at yahoo dot com
13:26 RE: problem in vrc437x/idt79s334a ROMRAM code Andy Dyer
07:26 EPXA10 DDR porting Raju Balu

August 22, 2003
17:15 Re: Re: not able to bring link up !! Gary Thomas
17:09 Re: Re: not able to bring link up !! Nick Garnett
16:39 Re: Re: not able to bring link up !! Carlos Camargo
13:12 Re: Re: not able to bring link up !! mohanlal jangir
12:29 Re: eCos on cs89712 Michael Kelly
11:54 Re: eCos on cs89712 trilok soni
10:56 Re: Problem with unaligned memory access on ARM920T Gary Thomas
10:50 RE: Problem with unaligned memory access on ARM920T Robert Cragie
10:09 Problem with unaligned memory access on ARM920T Chaitanya Huilgol
09:34 Re: problem in vrc437x/idt79s334a ROMRAM code Nick Garnett
09:34 Re: not able to bring link up !! Nick Garnett
08:34 Re: eCos and IPSec sandeep
07:46 Context-switch time Michele Portolan
06:45 not able to bring link up !! mohanlal jangir
06:34 Re: building for flash Laurent GONZALEZ
06:01 Re: building for flash sensitron medical
03:57 Re: reset board automatically Jose Paul

August 21, 2003
23:44 problem about eCos-2.0 examples! RandyLin
21:46 Re: eCos and IPSec subin abraham
20:10 Re: reset board automatically Jonathan Larmour
20:06 Re: eCos and IPSec Matt Jerdonek
17:07 Mail from Fatima Iyesa Ismiana fatimaiyesaismiana5
15:59 Re: at91 serial driver status Andrew Lunn
14:31 Re: H8300H Simulator Problem Nick Garnett
12:57 Re: SSL encryption Gary Thomas
12:53 SSL encryption eibach
12:52 Re: eCos andIPSec Eric Doenges
12:25 Re: Building toolchains for LEON processor Jonathan Larmour
12:18 Re: more than one serial drivers Jonathan Larmour
11:45 Re: eCos andIPSec Andrew Lunn
11:36 Re: eCos andIPSec Eric Doenges
11:00 Re: eCos andIPSec Andrew Lunn
10:30 modem question 张 亮
10:26 eCos andIPSec subin abraham
10:01 RE: CRIS port Lars Viklund
09:24 {Spam?} R: Building toolchains for LEON processor micheleportolan
07:26 H8300H Simulator Problem praveena
05:55 Re: more than one serial drivers Thomas Eschenbacher
05:55 Re: PCI Ethernet card Michael Anburaj
05:51 Re: Redboot load problem Michael Anburaj
02:15 Re: PCI Ethernet card Raghu BK
01:01 Re: PCI Ethernet card Michael Anburaj

August 20, 2003
23:49 Re: PCI Ethernet card Raghu BK
21:46 Re: How is symbol "__thumb__" defined? Thanks a lot Jonathan Larmour
21:42 Re: How is symbol "__thumb__" defined? Thanks a lot Jonathan Larmour
21:29 Re: an issue about elf and axf format Jonathan Larmour
21:20 Re: more than one serial drivers Jonathan Larmour
18:56 more than one serial drivers sensitron medical
17:21 more than one serial drivers Thomas Eschenbacher
17:07 Re: Round robin scheduler question Nick Garnett
16:23 powermac Ryan Boder
14:11 Re: Round robin scheduler question Andrew Lunn
14:01 Re: Round robin scheduler question sandeep
13:48 Re: Round robin scheduler question sandeep
13:33 Email Content Rejection Notice wedontlikespame
13:29 Re: Round robin scheduler question sandeep
13:18 Re: Round robin scheduler question Andrew Lunn
13:15 Re: Re: Help with floppy start up type] Jonathan Larmour
12:58 Re: Round robin scheduler question Andrew Lunn
12:54 RE: Round robin scheduler question Ian Gilmour
12:38 Re: Round robin scheduler question Andrew Lunn
12:18 RE: Round robin scheduler question Ian Gilmour
11:38 Re: Round robin scheduler question Andrew Lunn
11:05 Round robin scheduler question Ian Gilmour
09:41 Re: How is symbol "__thumb__" defined? Thanks a lot Eric de Jong
07:58 an issue about elf and axf format Young Jay
07:47 Re: PCI Ethernet card Eric Doenges
07:31 How is symbol "__thumb__" defined? Thanks a lot QiangHuang
06:55 Re: building for flash Laurent GONZALEZ
06:46 Re: building for flash Laurent GONZALEZ
04:47 Re: Redboot load problem Gary Thomas
04:34 Re: Re: Help with floppy start up type] praveena
04:28 Re: Help with floppy start up type praveena
01:31 Re: [eCos]How to build eCos test code with the configtool? Young Jay
00:56 Re: Redboot load problem Michael Anburaj
00:04 Redboot load problem Dhiraj Bawadhankar

August 19, 2003
22:14 Re: Re: Linking errors with arm-elf-g++ Andrew Lunn
22:12 Re: PCI Ethernet card Michael Anburaj
20:54 Re: building for flash sensitron medical
20:09 Security Alert - ScanMail for Lotus Notes Chris_Melillo/American_Arium/U
20:09 Security Alert - ScanMail for Lotus Notes Chris_Melillo/American_Arium/U
20:09 Security Alert - ScanMail for Lotus Notes Chris_Melillo/American_Arium/U
19:02 Re: Linking errors with arm-elf-g++ Peter Blair
16:40 Re: periodic threads with kapi? Ryan Boder
16:21 RE: periodic threads with kapi? Robert Cragie
16:09 Re: periodic threads with kapi? Ryan Boder
16:00 Re: periodic threads with kapi? Ryan Boder
14:08 Re: eCos on cs89712 Michael Kelly
14:07 Re: Block device IO Gary Thomas
14:03 eCos on cs89712 trilok soni
13:57 Block device IO Savin Zlobec
13:36 Re: Linking errors with arm-elf-g++ Andrew Lunn
13:31 Re: problem in vrc437x/idt79s334a ROMRAM code Tim michals
13:28 Linking errors with arm-elf-g++ Ravi Joshi
13:10 Mailman results for Tkined tkined-request
12:40 Re: Assertion in BSD Stack - ARP Gary Thomas
12:19 Re: Linux synthetic target & JFFS2 Andrew Lunn
12:06 RE: Linux synthetic target & JFFS2 Koeller, T.
12:04 Re: eCos and ARM7TDMI Andrew Lunn
12:01 Re: periodic threads with kapi? Nick Garnett
11:55 eCos and ARM7TDMI subin abraham
11:29 Re: Linux synthetic target & JFFS2 Andrew Lunn
07:33 Unexpected x86 config problems Peter Graf
06:58 Re: [eCos]How to build eCos test code with the configtool? Andrew Lunn
04:28 Re: periodic threads with kapi? Ryan Boder
02:05 [eCos]How to build eCos test code with the configtool? Young Jay

August 18, 2003
23:50 problem in vrc437x/idt79s334a ROMRAM code Andy Dyer
20:10 Re: ld segfaults Andrew Lunn
19:54 RE: ld segfaults Mark Grosberg
19:52 Permissions and Network Stuart Park
19:49 Re: CRIS port Bart Veer
19:37 Re: Can't get socket's IP address w/ new stack? Grant Edwards
19:13 Re: Can't get socket's IP address w/ new stack? Gary Thomas
19:11 Re: CRIS port Gary Thomas
19:10 Re: Can't get socket's IP address w/ new stack? Grant Edwards
19:08 CRIS port Simon Posnjak
18:43 multiple serial drivers Thomas Eschenbacher
18:00 Re: periodic threads with kapi? Bart Veer
16:54 Assertion in BSD Stack - ARP Jay Foster
16:29 RE: ld segfaults Jay Foster
16:24 using ecosconfig and configTool for other projects Peter Soetens
15:57 Re: Can't get socket's IP address w/ new stack? Grant Edwards
15:33 Re: periodic threads with kapi? Ryan Boder
15:25 Re: Can't get socket's IP address w/ new stack? Andrew Lunn
15:24 Re: Can't get socket's IP address w/ new stack? Grant Edwards
15:21 Re: Can't get socket's IP address w/ new stack? Gary Thomas
15:16 Re: Can't get socket's IP address w/ new stack? Grant Edwards
14:37 Re: Block device IO Savin Zlobec
14:06 Re: Block device IO David N. Welton
13:56 Block device IO Savin Zlobec
12:02 Re: periodic threads with kapi? Nick Garnett
11:53 Re: redboot for plain pxa 263/255 Gary Thomas
10:07 Re: FW: binary semaphores from counting or mutex sandeep
09:51 redboot for plain pxa 263/255 Ka Chun, Cheng
09:42 network question Cho, JinJe (FXKIS.KOR)
08:53 Re: periodic threads with kapi? Bart Veer
08:34 Re: at91 serial driver bug? Eric de Jong
08:17 Re: PCI Ethernet card Eric Doenges
04:05 Re: periodic threads with kapi? Ryan Boder

August 17, 2003
19:28 Re: additional compiler options in cdl script Bart Veer
19:19 Re: Building toolchains for LEON processor Bart Veer
19:12 Re: ld segfaults Bart Veer
19:02 Re: binary semaphores from counting or mutex Bart Veer
18:43 Re: periodic threads with kapi? Bart Veer
14:00 periodic threads with kapi? Ryan Boder
10:26 eCos2 build error Vikas K. Prasad

August 16, 2003
07:17 Re: PS/2 Keyboard as I/O device Chuck McManis

August 15, 2003
22:46 Re: Can't get socket's IP address w/ new stack? Grant Edwards
21:45 Re: Can't get socket's IP address w/ new stack? Gary Thomas
21:34 Re: Can't get socket's IP address w/ new stack? Grant Edwards
20:49 Re: building for flash sensitron medical
20:38 Re: Running from Redboot Unni Nair
20:35 Re: Running from Redboot Gary Thomas
20:30 Re: Running from Redboot Unni Nair
20:28 Re: Running from Redboot Gary Thomas
20:27 Re: building for flash Gary Thomas
20:25 Running from Redboot Unni Nair
20:22 building for flash sensitron medical
20:19 Re: iPaq 3600 - restore WinCE ? Colin McPhail
20:05 Can't get socket's IP address w/ new stack? Grant Edwards
20:05 Re: iPaq 3600 - restore WinCE ? Gary Thomas
19:46 iPaq 3600 - restore WinCE ? Colin McPhail
19:42 Re: Redboot application Gary Thomas
19:36 Re: Query!! Gary Thomas
18:53 Re: Running from Redboot Gary Thomas
18:15 Running from Redboot Unni Nair
18:05 Problems debugging OpenRISC target Robert Cragie
15:28 Re: memory layout of the eb55 board Nick Garnett
12:28 at91 serial driver bug? Per Hedblom
12:01 Re: ecos with thumb Nick Garnett
11:13 RE: at91 serial driver status Øyvind Harboe
11:02 using of redboot images Roman Jordan
09:32 Re: FW: binary semaphores from counting or mutex Nick Garnett
09:32 Re: Help with floppy start up type Nick Garnett
08:57 memory layout of the eb55 board Roman Jordan
08:38 at91 serial driver status Koeller, T.
06:18 Re: PCI Ethernet card Michael Anburaj
01:21 Re: How to interpret hal_platform_extra.h? Jason Geng

August 14, 2003
22:44 Re: minimal ecos memory requirements on mips Michael Anburaj
20:13 minimal ecos memory requirements on mips Adrian Caceres
18:29 FW: binary semaphores from counting or mutex Aaron Case
15:21 Re: binary semaphores from counting or mutex sandeep
15:10 binary semaphores from counting or mutex Aaron Case
14:15 Re: [openrisc] Debugging application Scott Furman
10:31 Debugging application Robert Cragie
09:09 Re: additional compiler options in cdl script mohanlal jangir
08:19 Re: additional compiler options in cdl script mohanlal jangir
06:50 Re: PCI Ethernet card Eric Doenges

August 13, 2003
22:43 Re: PCI Ethernet card Michael Anburaj
21:26 Cirus Logic EDB7312, eCos 1.3.1 & GDB Stubs Peter Blair
19:02 Re: cyg_select_abort() missing in new stack? Grant Edwards
18:56 Seminole micro-webserver available for eCos Andrew M Hoerter
18:53 Configuration Tool: preserved state - where? Robert Siracusa
15:28 Re: Fwd: Re: RedBoot + Configuration tool 2.11 question Jonathan Larmour
15:28 Re: Help with floppy start up type Jonathan Larmour
14:51 Re: additional compiler options in cdl script Gary Thomas
14:40 additional compiler options in cdl script mohanlal jangir
12:13 Re: How to interpret hal_platform_extra.h? Gary Thomas
12:01 Re: Re: ecos realtek driver Gary Thomas
11:14 RE: eCos ROM application crashes without Redboot Øyvind Harboe
10:43 How to interpret hal_platform_extra.h? Jason Geng
08:52 Re: ecos realtek driver Eric Doenges
08:09 Re: PCI Ethernet card Eric Doenges
06:33 Re: PCI Ethernet card Michael Anburaj

August 12, 2003
19:10 Re: Coldfire M5272C3 question Alex Schuilenburg
17:49 Re: Poor performance of new TCP stack? Grant Edwards
17:28 Poor performance of new TCP stack? Grant Edwards
17:16 Re: cyg_select_abort() missing in new stack? Nick Garnett
16:42 RE: Linux synthetic target & JFFS2 Koeller, T.
16:35 Linux synthetic target & JFFS2 Koeller, T.
16:31 cyg_select_abort() missing in new stack? Grant Edwards
16:07 ecos port for toshiba tx3927 processor? agyhoo
15:18 Coldfire M5272C3 question Chuck Partridge
15:01 RE: Newbie - ARM simulator ??? Robert Cragie
14:19 RE: Newbie - ARM simulator ??? Lee Davies
13:06 Bootloader capable of writing directly to flash via ymodem serial port download Øyvind Harboe
12:38 RE: Newbie - ARM simulator ??? Robert Cragie
12:21 Newbie - ARM simulator ??? Lee Davies
12:01 Re: Re: Fwd: RealTek 8139 ethernet driver Nick Garnett
11:35 EB40a flash programming/erase and interrupts crashes Øyvind Harboe
09:42 Global variable problem solved Ravi Joshi
06:57 Re: arm-elf-gdb can't connect Angel on EB40 RandyLin
06:09 =?big5?b?UmU6IFtFQ09TXSCmXqtIoUcgUmU6IFtFQ09TXSBhcm0tZWxmLWdkYiBjYW4ndA==?==?big5?b?IGNvbm5lY3QgQW5nZWwgb24gRUI0MA==?= mohanlal jangir
05:39 ld segfaults Mark Grosberg
04:18 Re: RedBoot + Configuration tool 2.11 question G.Muruganandam
03:37 Re: what is the difference between uclinux amd eCos? Wang Qi
03:33 =?big5?b?pl6rSKFHIFJlOiBbRUNPU10gYXJtLWVsZi1nZGIgY2FuJ3QgY29ubmVjdA==?=Angel on EB40 RandyLin
02:40 what is the difference between uclinux amd eCos? =?big5?q?=AB=DB=A6=DC=20=C4=AC

August 11, 2003
21:30 RE: eCos ROM application crashes without Redboot Øyvind Harboe
20:57 Fwd: Re: RedBoot + Configuration tool 2.11 question G.Muruganandam
19:41 RE: Re: Fwd: RealTek 8139 ethernet driver Andy Dyer
19:16 RE: Re: Fwd: RealTek 8139 ethernet driver Gary Thomas
19:13 RE: Re: Fwd: RealTek 8139 ethernet driver Andy Dyer
16:28 Re: Video mode code / eCos demo David N. Welton
16:12 Re: Video mode code / eCos demo Kumanan
15:52 Redboot building problem yu-fang wu
15:51 Re: Debugging in resource limited environment Gary Thomas
15:45 Debugging in resource limited environment Robert Cragie
15:17 Redboot building problem yu-fang wu
14:32 Re: Help with floppy start up type Nick Garnett
14:20 Re: Video mode code / eCos demo David N. Welton
14:15 Re: arm-elf-gdb can't connect Angel on EB40 Grant Edwards
14:01 i82559 Ethernet driver Peter Graf
13:30 RE: eCos ROM application crashes without Redboot Øyvind Harboe
12:54 RE: eCos ROM application crashes without Redboot Gary Thomas
12:18 RE: eCos ROM application crashes without Redboot Øyvind Harboe
12:12 Re: PS/2 Keyboard as I/O device Gary Thomas
12:04 Re: PS/2 Keyboard as I/O device Nick Garnett
12:03 Re: Global variables get corrupted Nick Garnett
11:58 Re: PS/2 Keyboard as I/O device Francois Retief
11:57 Re: eCos ROM application crashes without Redboot Gary Thomas
11:51 eCos ROM application crashes without Redboot Øyvind Harboe
09:52 Re: Help with floppy start up type mohanlal jangir
09:45 Help with floppy start up type praveena
09:26 Global variables get corrupted Ravi Joshi
07:16 include <string.h> in strptime.cxx Jan Veldeman
06:25 RE: Building toolchains for LEON processor Ren, Han Tao (Hans)
05:59 How to enable npe support for ixdp425 board? Jason Geng
03:11 Building toolchains for LEON processor Ren, Han Tao (Hans)
01:58 arm-elf-gdb can't connect Angel on EB40 RandyLin

August 10, 2003
17:13 PS/2 Keyboard as I/O device Chuck McManis
16:26 Re: PCI Ethernet card Gary Thomas

August 09, 2003
22:06 easy-to-use a_w_falls2
21:25 Re: PCI Ethernet card Chuck McManis
21:08 Re: PCI Ethernet card Gary Thomas
20:22 Re: PCI Ethernet card Michael Anburaj
19:22 easy-to-use a_stupid_web2
13:20 Re: PCI Ethernet card Gary Thomas
10:50 Re: PCI Ethernet card Michael Anburaj

August 08, 2003
22:42 Re: RedBoot + Configuration tool 2.11 question G.Muruganandam
21:04 Re: dynamic allocation of memory during driver initialization? Andrew Lunn
21:01 Re: dynamic allocation of memory during driver initializat ion? Grant Edwards
20:59 Re: dynamic allocation of memory during driver initializat ion? Grant Edwards
20:57 Re: dynamic allocation of memory during driver initializat ion? Andrew Lunn
20:56 Re: dynamic allocation of memory during driver initialization? Grant Edwards
20:56 Re: dynamic allocation of memory during driver initialization? Gary Thomas
20:50 Re: dynamic allocation of memory during driver initializat ion? Grant Edwards
20:49 Re: dynamic allocation of memory during driver initialization? Andrew Lunn
20:46 RE: dynamic allocation of memory during driver initialization? Jay Foster
20:38 dynamic allocation of memory during driver initialization? Grant Edwards
20:03 Video mode code / eCos demo David N. Welton
19:02 Re: RedBoot + Configuration tool 2.11 question Jonathan Larmour
18:56 Re: RedBoot + Configuration tool 2.11 question Andrew Lunn
18:47 Re: RedBoot + Configuration tool 2.11 question G.Muruganandam
18:23 Re: build problem with 2.0 Grant Edwards
17:44 Re: Help with Redboot an a ARM SA1100 Lart Board Gary Thomas
17:32 Help with Redboot an a ARM SA1100 Lart Board Steven.Clugston
17:28 build problem with 2.0 Grant Edwards
17:17 Re: VNC server for eCos - updated Chris Garry
17:04 Re: VNC server for eCos - updated Jani Monoses
16:30 VNC server for eCos - updated Chris Garry
16:03 Re: gcc3.3 everything in the data segment? Bart Veer
14:48 Re: gcc3.3 everything in the data segment? Jani Monoses
14:40 Re: gcc3.3 everything in the data segment? Andrew Lunn
14:32 Re: gcc3.3 everything in the data segment? Nick Garnett
12:48 Re: gcc3.3 everything in the data segment? Gary Thomas
12:11 Re: gcc3.3 everything in the data segment? Andrew Lunn
12:02 Re: PCI Ethernet card Nick Garnett
12:02 Re: gcc3.3 everything in the data segment? Nick Garnett
08:36 Re: My "Angel" is back, but something strange.....on EB40 Greg Holdren
08:32 gcc3.3 everything in the data segment? Andrew Lunn
08:31 Re: Question for displaying floating point in eCOSaplication. sandeep
08:12 My "Angel" is back, but something strange.....on EB40 RandyLin
07:52 Re: PCI Ethernet card Michael Anburaj
06:33 xscale redboot VS ecos CVS.. Ka Chun, Cheng
03:43 Re: RedBoot + Configuration tool 2.11 question Jonathan Larmour
00:08 Re: RedBoot + Configuration tool 2.11 question G.Muruganandam

August 07, 2003
23:15 Re: RedBoot + Configuration tool 2.11 question Andrew Lunn
23:02 Re: RedBoot + Configuration tool 2.11 question G.Muruganandam
20:42 Re: initializing cyg_handle_t values before passing to a function Andrew Lunn
19:55 initializing cyg_handle_t values before passing to a function Aaron Case
15:16 Re: Question for displaying floating point in eCOSaplication. Thanks a lot sandeep
14:41 PCMCIA application driver for XScale PXA255 port deepak rajalingam
14:40 RE: Question for displaying floating point in eCOSaplication. Thanks a lot QiangHuang
14:24 RE: Question for displaying floating point in eCOSaplication. Thanks a lot Gary Thomas
14:20 RE: Question for displaying floating point in eCOS aplication. Thanks a lot QiangHuang
13:52 RE: Question for displaying floating point in eCOS aplication. Thanks a lot QiangHuang
13:30 Re: Question for displaying floating point in eCOS aplication. Thanks a lot Andrew Lunn
13:04 Re: Question for displaying floating point in eCOS aplication. Thanks a lot Andrew Lunn
12:43 Question for displaying floating point in eCOS aplication. Thanks a lot QiangHuang
11:55 Re: Sucessfull eCos porting done on ARM926EJ-S target board. Gary Thomas
11:54 Re: Trying to put Embedded LINUX on EPXA10 Gary Thomas
07:30 Trying to put Embedded LINUX on EPXA10 Ravi Dubey
07:09 Re: redboot on i386 serial ports Mark Grosberg
02:36 Re: redboot on i386 serial ports Reed Lawson
02:19 Sucessfull eCos porting done on ARM926EJ-S target board. Satish Kumar

August 06, 2003
22:15 RE: Should `$` be typed always to switch from Redboot to GDB Stub Andy Dyer
20:50 Re: Recommended gcc version for 1.0? Grant Edwards
20:14 Re: Recommended gcc version for 1.0? Bart Veer
18:51 Re: Motorola Dragonball MX1/L port. Michael Anburaj
18:12 Re: Recommended gcc version for 1.0? Grant Edwards
18:12 Re: Recommended gcc version for 1.0? Gary Thomas
18:00 Re: Recommended gcc version for 1.0? Nick Garnett
17:39 Re: Recommended gcc version for 1.0? Grant Edwards
17:07 Re: powerpc eabi installation and compilation Nick Garnett
17:07 Re: Recommended gcc version for 1.0? Nick Garnett
15:49 package extractor Grant Edwards
13:21 Re: RealTek 8139 on Advantech PCM-5820 Eric Doenges
12:09 Re: RE: My "Angel" is gone on my EB40.... RomanJordan
12:04 RE: My "Angel" is gone on my EB40.... Øyvind Harboe
12:02 Re: redboot on i386 serial ports Nick Garnett
11:58 Re: RealTek 8139 on Advantech PCM-5820 Chris Nimmers
11:03 Re: RealTek 8139 on Advantech PCM-5820 Eric Doenges
09:54 Re: gdb on redboot (partial success) Andrew Lunn
09:51 Re: gdb on redboot (partial success) Satish Kumar
09:39 RealTek 8139 on Advantech PCM-5820 Chris
09:32 Re: 5Kc core card for Atlas MIPS board Nick Garnett
09:32 Re: gdb on redboot (partial success) Nick Garnett
09:09 RE: Motorola Dragonball MX1/L port. Robert Cragie
08:52 My "Angel" is gone on my EB40.... RandyLin
08:18 Re: gdb on redboot (partial success) Satish Kumar
07:56 Re: gdb on redboot (partial success) Satish Kumar
06:38 Re: redboot on i386 serial ports Mark Grosberg
05:58 gdb on redboot (partial success) Satish Kumar
04:26 Re: Should `$` be typed always to switch from Redboot to GDB Stub Michael Anburaj
04:22 Re: redboot on i386 serial ports Reed Lawson
03:39 Should `$` be typed always to switch from Redboot to GDB Stub Satish Kumar
01:31 var_regs.h include for mips like ppc? Andy Dyer

August 05, 2003
23:19 5Kc core card for Atlas MIPS board Michael Anburaj
19:36 problem building cxxsup test Jeff Duncan
19:24 Configtool and file tests Jeff Duncan
19:24 Re: Recommended gcc version for 1.0? Grant Edwards
18:23 eb55 and RedBoot Image Roman Jordan
18:17 Re: Network characterisation with nc_test_master.c and nc_test_slave.c Jonathan Larmour
18:11 Re: Recommended gcc version for 1.0? Jonathan Larmour
18:10 Re: Recommended gcc version for 1.0? Mark Salter
18:05 Re: PCI Ethernet card Jonathan Larmour
17:59 Recommended gcc version for 1.0? Grant Edwards
17:51 Re: powerpc eabi installation and compilation Jonathan Larmour
17:35 Re: load data from floppy Nick Garnett
14:55 Re: load data from floppy David N. Welton
14:07 Motorola Dragonball MX1/L port. Elder Costa
09:32 Re: Help ! Question about PCI DMA memory allocation Nick Garnett
08:29 Re: config option under ecosconfig ? Andrew Lunn
08:20 config option under ecosconfig ? Matthieu . GIRARDIN
07:45 powerpc eabi installation and compilation Matthieu . GIRARDIN
03:16 Help ! Question about PCI DMA memory allocation Zi Zhou
02:08 RE: PCI Ethernet card Andy Dyer
01:51 Re: Question about hal stub debugging support. Thanks a lot. Jonathan Larmour
01:44 Re: Problem in cyg_io_compare? Jonathan Larmour
01:07 Re: Configtool building and code size Jonathan Larmour
01:04 Re: Configtool building and code size Jonathan Larmour
01:01 RE: PCI Ethernet card Michael Anburaj

August 04, 2003
17:43 Re: IXP425 Serial devices Nick Garnett
17:35 Re: load data from floppy Nick Garnett
17:33 Re: IXP425 Serial devices Svein-Erik Skjelbred
17:19 Re: question about EB55 Nick Garnett
17:17 Re: protected mode? Nick Garnett
17:08 Re: configtool, ecosconfig for a beginner 2 ? Nick Garnett
16:24 Re: load data from floppy David N. Welton
16:01 RE: ld errors from source repos. Gary Thomas
15:57 Re: question about EB55 Jonathan Larmour
15:13 Re: protected mode? Chuck McManis
15:06 RE: ld errors from source repos. Gary Thomas
14:36 Re: configtool, ecosconfig for a beginner suite ? Nick Garnett
14:35 Re: question about EB55 Nick Garnett
14:11 RE: PCI Ethernet card Andy Dyer
13:21 Re: Problem in cyg_io_compare? David N. Welton
12:51 Re: configtool, ecosconfig for a beginner suite ? sandeep
12:26 Re: configtool, ecosconfig for a beginner 2 ? Andrew Lunn
12:10 Re: configtool, ecosconfig for a beginner suite ? Andrew Lunn
12:09 configtool, ecosconfig for a beginner 2 ? Matthieu . GIRARDIN
12:03 RE: configtool, ecosconfig for a beginner suite ? Matthieu . GIRARDIN
11:55 Re: question about EB55 RomanJordan
11:11 RE: Question about hal stub debugging support. Thanks a lot. QiangHuang
10:52 RE: Configtool building and code size Robert Cragie
10:49 Re: Configtool building and code size David N. Welton
10:47 Re: configtool, ecosconfig for a beginner suite ? sandeep
10:19 Re: Configtool building and code size Andrew Lunn
10:04 Configtool building and code size Robert Cragie
10:00 Re: configtool, ecosconfig for a beginner suite ? Andrew Lunn
09:58 ISR Sim ? / Psim Suite ? Matthieu . GIRARDIN
09:54 configtool, ecosconfig for a beginner suite ? Matthieu . GIRARDIN
09:32 Re: ISR Sim ? / Psim ? Nick Garnett
09:32 Re: protected mode? Nick Garnett
09:32 Re: question about EB55 Nick Garnett
09:26 Re: configtool, ecosconfig for a beginner... sandeep
08:52 configtool, ecosconfig for a beginner... Matthieu . GIRARDIN
07:48 Re: PCI Ethernet card Eric Doenges
07:30 Re: PCI Ethernet card Eric Doenges
07:24 Re: protected mode? David N. Welton
07:10 Re: Network characterisation / net stack performance. Eric Doenges
06:38 ISR Sim ? / Psim ? Matthieu . GIRARDIN
05:00 protected mode? Chuck McManis
04:38 Off to the races Chuck McManis
03:11 Re: PCI Ethernet card Nikolay V. Pyatkov

August 03, 2003
22:22 Re: question about EB55 Greg Holdren
22:13 Re: PCI Ethernet card Michael Anburaj
20:54 question about EB55 Roman Jordan
13:18 Re: Question about hal stub debugging support. Thanks a lot. Gary Thomas
13:14 Re: success at last Gary Thomas
10:35 Question about hal stub debugging support. Thanks a lot. jameshq
05:30 Re: success at last Chuck McManis
04:30 success at last Chuck McManis
04:07 Re: I'm wondering ... Andrew M Hoerter
03:43 I'm wondering ... Chuck McManis
02:18 Re: Getting closer ... Chuck McManis
02:10 Re: Getting closer ... Chuck McManis
01:41 Re: Getting closer ... Andrew Lunn

August 02, 2003
21:48 Getting closer ... Chuck McManis
18:23 weirder and weirder Chuck McManis
17:32 Not recognizing the Pro 100 Ethernet? Chuck McManis
12:01 Re: PCI Ethernet card Nick Garnett
07:15 RE: PCI Ethernet card Michael Anburaj

August 01, 2003
23:05 Re: ld errors from source repos. Gary Thomas
22:02 Re: questions abaut binary images Andrew Lunn
21:57 Re: questions abaut binary images Roman Jordan
21:39 Re: questions abaut binary images Andrew Lunn
21:33 questions abaut binary images Roman Jordan
21:17 ld errors from source repos. Aaron Case
17:35 RE: PCI Ethernet card Andy Dyer
17:29 Re: timed restart of a thread from within a thread Nick Garnett
17:09 Re: timed restart of a thread from within a thread Andrew Lunn
17:07 Re: Network characterisation / net stack performance. Nick Garnett
17:07 Re: loading application on redboot Nick Garnett
17:07 Re: Question eCOS debugging. Thanks a lot. Nick Garnett
15:36 timed restart of a thread from within a thread Aaron Case
14:32 Re: VMA and LMA question Nick Garnett
14:32 Re: PCI Ethernet card Nick Garnett
13:01 Network characterisation / net stack performance. Richa Jain Mehta
12:36 Re: Re: Fwd: RealTek 8139 ethernet driver Gary Thomas
12:31 Re: Re: Fwd: RealTek 8139 ethernet driver Eric Doenges
12:24 Re: PCI Ethernet card Eric Doenges
12:22 Re: PCI arbiter settings Jani Monoses
12:21 RE: Question eCOS debugging. Thanks a lot. QiangHuang
12:02 Re: Network characterisation with nc_test_master.c and nc_test_slave.c Nick Garnett
12:02 Re: Question eCOS debugging. Thanks a lot. Nick Garnett
12:02 Re: HAL_PCI_ALLOC_BASE_MEMORY question ?? Nick Garnett
12:02 Re: PCI arbiter settings Nick Garnett
12:02 Re: IXP425 Serial devices Nick Garnett
10:56 PCI Ethernet card Michael Anburaj
10:44 VMA and LMA question rakesh
09:01 Re: loading application on redboot Michael Anburaj
09:00 Re: loading application on redboot Satish Kumar
08:45 Re: loading application on redboot Bob Koninckx
08:36 Re: loading application on redboot Satish Kumar
08:34 RE: Question eCOS debugging. Thanks a lot. QiangHuang
08:31 Re: loading application on redboot Michael Anburaj
08:22 Re: loading application on redboot Satish Kumar
07:06 Re: loading application on redboot Satish Kumar
06:51 IXP425 Serial devices Svein-Erik Skjelbred
06:05 Re: HAL_PCI_ALLOC_BASE_MEMORY question ?? mohanlal jangir
05:36 Re: Network characterisation with nc_test_master.c and nc_test_slave.c mohanlal jangir
04:47 Network characterisation with nc_test_master.c and nc_test_slave.c Richa Jain Mehta
04:34 Re: loading application on redboot Jonathan Larmour
04:14 Re: loading application on redboot mohanlal jangir
02:51 Re: loading application on redboot Satish Kumar
01:57 Re: Re: Fwd: RealTek 8139 ethernet driver Gary Thomas
00:41 Re: loading application on redboot Jonathan Larmour
00:32 Re: PCI arbiter settings Jonathan Larmour
00:21 Re: Question eCOS debugging. Thanks a lot. Jonathan Larmour

Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:
Mail converted by MHonArc 2.6.3