This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: loading application on redboot
- From: Satish Kumar <satish at bvt dot sc dot sanyo dot co dot jp>
- To: Jonathan Larmour <jifl at eCosCentric dot com>
- Cc: Michael Anburaj <embeddedeng at hotmail dot com>,ecos-discuss at sources dot redhat dot com
- Date: Fri, 01 Aug 2003 11:51:27 +0900
- Subject: Re: [ECOS] loading application on redboot
- References: <Law15-F37hIi6YEFmsQ0001acc7@hotmail.com> <3F29B71C.3010903@eCosCentric.com>
Hi,
using hyperteminal i have downloaded hello.srec at 0x40000 and this
time when i tried "go 0x40040" redboot hangs..i see no output on the
hyper terminal.
btw, i tried another method i.e using arm-elf-gdb..after powering on my
system, on "arm-elf-gdb -nw hello" ;i get the following output:
$ arm-elf-gdb -nw hello
GNU gdb 5.3 (eCosCentric)
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "--host=i686-pc-cygwin --target=arm-elf"...
(gdb) target remote com1
Remote debugging using com1
Ignoring packet error, continuing...
Ignoring packet error, continuing...
Ignoring packet error, continuing...
Couldn't establish connection to remote target
Malformed response to offset query, timeout
(gdb) quit
i m not sure if the problem is with building application or with
the redboot_ROM monitor.
help plz..
satish
Satish Kumar <satish@bvt.sc.sanyo.co.jp>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss