This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: loading application on redboot


i was just wondering if gdb fails to work on 115200 baudrate, coz the
gdb fails to connect even after setting the baudrate to 115200.

satish


On Fri, 01 Aug 2003 08:31:36 +0000
"Michael Anburaj" <embeddedeng@hotmail.com> wrote:

> Yea,
> 
> open gdb with -w (insight) & you can set the baud rate at target settings,
> 
> $ arm-elf-gdb -w hello
> 
> or if you open the text gdb
> 
> gdb> set remotebaud 115200
> 
> -Mike.
> 
> >From: Satish Kumar <satish@bvt.sc.sanyo.co.jp>
> >To: Jonathan Larmour <jifl@eCosCentric.com>
> >CC: Michael Anburaj 
> ><embeddedeng@hotmail.com>,ecos-discuss@sources.redhat.com
> >Subject: Re: [ECOS] loading application on redboot
> >Date: Fri, 01 Aug 2003 17:22:50 +0900
> >
> >well, actually my serial driver is set to baudrate 115200..
> >will the GDB work on this baudrate..?
> >
> >satish
> >
> >
> >On Fri, 01 Aug 2003 05:34:08 +0100
> >Jonathan Larmour <jifl@eCosCentric.com> wrote:
> >
> > > Satish Kumar wrote:
> > > > Hi,
> > > >
> > > >     using hyperteminal i have downloaded hello.srec at 0x40000 and 
> >this
> > > > time when i tried "go 0x40040" redboot hangs..i see no output on the
> > > > hyper terminal.
> > > >
> > > > btw, i tried another method i.e using arm-elf-gdb..after powering on 
> >my
> > > > system, on "arm-elf-gdb -nw hello" ;i get the following output:
> > > >
> > > > $ arm-elf-gdb -nw hello
> > > > GNU gdb 5.3 (eCosCentric)
> > > > Copyright 2002 Free Software Foundation, Inc.
> > > > GDB is free software, covered by the GNU General Public License, and 
> >you are
> > > > welcome to change it and/or distribute copies of it under certain 
> >conditions.
> > > > Type "show copying" to see the conditions.
> > > > There is absolutely no warranty for GDB.  Type "show warranty" for 
> >details.
> > > > This GDB was configured as "--host=i686-pc-cygwin --target=arm-elf"...
> > > > (gdb) target remote com1
> > > > Remote debugging using com1
> > > > Ignoring packet error, continuing...
> > > > Ignoring packet error, continuing...
> > > > Ignoring packet error, continuing...
> > > > Couldn't establish connection to remote target
> > > > Malformed response to offset query, timeout
> > > > (gdb) quit
> > > >
> > > > i m not sure if the problem is with building  application or with
> > > > the redboot_ROM monitor.
> > >
> > > This probably means your application isn't built for the right address 
> >in
> > > RAM. Do arm-elf-objdump -h on the (ELF) executable to see what the load
> > > address is, and compare that against your memory map.
> > >
> > > Jifl
> > > --
> > > eCosCentric    http://www.eCosCentric.com/    The eCos and RedBoot 
> >experts
> > > --[ "You can complain because roses have thorns, or you ]--
> > > --[  can rejoice because thorns have roses." -Lincoln   ]-- 
> >Opinions==mine
> >
> >--
> >Satish Kumar <satish@bvt.sc.sanyo.co.jp>
> >
> 
> _________________________________________________________________
> MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.  
> http://join.msn.com/?page=features/virus

-- 
Satish Kumar <satish@bvt.sc.sanyo.co.jp>


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]