This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Help with floppy start up type
- From: "mohanlal jangir" <mohanlaljangir at hotmail dot com>
- To: <praveena at netindial dot com>
- Cc: <ecos-discuss at sources dot redhat dot com>
- Date: Mon, 11 Aug 2003 15:16:19 +0530
- Subject: Re: [ECOS] Help with floppy start up type
- References: <2041.202.63.106.104.1060595212.squirrel@mail.netindians.org>
> Hey There,
>
> I built eCos library for i386 PC target. Then i compiled the sample hello
> program in examples dir in ecos distribution. Then with the following
> commands copied the hello binary onto floppy.
>
> $fdformat /dev/fd0H1440 (format floppy drive)
> $i386-elf-objcopy -O binary hello hello.bin (convert elf to binary)
> $dd conv=sync if=app.bin of=/dev/fd0H1440 (copy onto floppy)
>
> But when i tried to boot with the floppy disk to test the 'hello' binary ,
> the binary boots properly(I can see the dots). But after that I see an
> empty screen with cursor blinking.
>
> Any help on where I am going wrong. In the configuration tool, I have
> chosen Startup Type = FLOPPY and enabling the Build GDB Stub option.
>
> Regards,
> Praveena
>
Why don't you try to boot the i386 PC with redboot and then download the
binary via redboot.
Regards
Mohanlal
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss