ecos-discuss archive
date index for September, 2003

This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:

September 30, 2003
19:19 info on i386 rom redboot theoharis tsenis
17:44 Re: Does only the RedBOOT support the eCos? Gary Thomas
15:55 Re: Does only the RedBOOT support the eCos? Gary Thomas
15:25 RE: (Is main() a normal thread ?) problem was my fault... Doyle, Patrick
15:21 (Is main() a normal thread ?) problem was my fault... Claudio Leonel
13:36 Re: Re: Is main() a normal thread ? Savin Zlobec
12:22 Re: Building RedBoot without GDB stubs Jani Monoses
12:10 Re: priority for main is always set as 10 Claudio Leonel
12:03 Re: Re: Is main() a normal thread ? Claudio Leonel
11:57 Re: Does only the RedBOOT support the eCos? Gary Thomas
11:49 Re: Installing ECOS on IPAQ: Reflash Problem Gary Thomas
11:47 Help on ROM redboot theoharis tsenis
11:42 Jflash erase timed out problem Xue weihua
11:06 Re: alarm not triggering Slawek
10:53 Does only the RedBOOT support the eCos? b8944004
10:42 alarm not triggering Mahesh
10:41 Installing ECOS on IPAQ: Reflash Problem Leo McManus
08:32 Re: Re: Is main() a normal thread ? Savin Zlobec
08:01 Installing ECOS on IPAQ: Reflash Problem Leo McManus
07:54 Installing ECOS on IPAQ: Reflash Problem Leo McManus
07:23 Re: diference between ecos and redboot Bob Koninckx
07:21 Re: 8260 driver cannot access DPRAM Christoph Csebits
07:19 Installing ECOS on IPAQ: Reflash Problem Leo McManus
06:53 Re: FAT16 Savin Zlobec
06:01 Re:Re: alarm not triggering Mahesh
06:01 priority for main is always set as 10 Mahesh
05:53 mp3 decoder on eCos Satish Kumar
04:50 priority for main is always set as 10 Mahesh
04:44 Re: alarm not triggering Mahesh
03:16 Re: Keeping 2.0 source tree up to date Reinhard JESSICH
02:06 Re: alarm not triggering Satish Kumar
01:11 Jflash erase timed out problem weihua Xue

September 29, 2003
22:01 Strange behavior building stuff for Sega Dreamcast see output Gregg C Levine
21:58 Re: diference between ecos and redboot Chuck McManis
20:50 Re: 8260 driver cannot access DPRAM Gary Thomas
20:42 8260 driver cannot access DPRAM Todd Smith
20:20 anyone have an eCos application running on the Intel IXD425 or ADI GRG platforms? agyhoo
19:43 diference between ecos and redboot Lucas Aimaretto
17:16 how to install redboot Lucas Aimaretto
16:37 Re: Keeping 2.0 source tree up to date Roland Caßebohm
15:50 Re: Keeping 2.0 source tree up to date Roland Caßebohm
14:50 Re: redboot elf loader Gary Thomas
14:43 Re: redboot elf loader Mark Salter
14:27 Re: redboot elf loader Gary Thomas
14:23 Re: redboot elf loader Artur Lipowski
14:17 Re: redboot elf loader Mark Salter
14:08 Re: redboot elf loader Artur Lipowski
14:05 Re: redboot elf loader Gary Thomas
14:00 Re: redboot elf loader Mark Salter
13:48 Re: redboot elf loader Gary Thomas
13:37 Re: redboot elf loader Artur Lipowski
12:58 Re: Re: Is main() a normal thread ? Claudio Leonel
12:54 Re: redboot elf loader Gary Thomas
11:59 Re: redboot elf loader Gary Thomas
11:21 alarm not triggering Mahesh
10:58 Re: Is main() a normal thread ? Savin Zlobec
10:52 redboot elf loader Artur Lipowski
10:28 Re: accept() behaviour (out of file descriptors) Thomas BINDER
06:36 Re: General questions on ecos Eric de Jong

September 27, 2003
23:28 Re: PANIC: soaccept: !NOFDREF Gary Thomas
22:10 PANIC: soaccept: !NOFDREF Grant Edwards
20:38 General questions on ecos Gatien Gillon
11:34 Help on installing redboot on a laptop Gatien Gillon
10:11 question about adding SDL on microwindow b8944028

September 26, 2003
22:02 Is main() a normal thread ? Claudio Leonel
17:44 Re: Fix in clock.cxx Nick Garnett
12:01 Re: accept() behaviour (out of file descriptors) Nick Garnett
08:48 Re: how to build synthetic targets? Savin Zlobec
08:27 Re: How to set clock related options? Savin Zlobec
07:00 Re: accept() behaviour (out of file descriptors) Thomas BINDER
06:37 Re: 1ms polling period Eric Doenges
06:36 Re: 1ms polling period Eric de Jong
05:55 1ms polling period eibach
04:54 Red Boot in a FLASH Lucas Aimaretto
03:23 RE: Re: RE: Re: How to set clock related options? caocangmou
02:09 how to build synthetic targets? azad
00:21 i82559 falls in loop !! mohanlal jangir

September 25, 2003
22:47 Has anyone run using a XEON processor kevin_lemay
17:28 Re: accept() behaviour (out of file descriptors) Nick Garnett
17:28 Re: RE: Re: How to set clock related options? Nick Garnett
14:06 Re: how to startup the ecos from Linux? Savin Zlobec
13:57 Bridge test code in OpenBSD Manu Sharma
13:51 RE: __attribute aligned and objcopy Øyvind Harboe
13:36 accept() behaviour (out of file descriptors) Christoph Csebits
13:33 RE: Re: How to set clock related options? Savin Zlobec
13:30 Re: Serial connection over two sytems Jonathan Larmour
13:09 Re: how to startup the ecos from Linux? b8944004
12:48 RE: Re: How to set clock related options? Savin Zlobec
10:59 Re: __attribute aligned and objcopy Gary Thomas
10:37 __attribute aligned and objcopy Øyvind Harboe
10:29 Serial connection over two sytems sowmya.k
10:21 gcc compile probelm Luca Formaggio
09:12 How to get information about execution time? Pravadelli Graziano
09:09 PowerPC decrementer dec ? Matthieu . GIRARDIN
09:06 RE: Re: How to set clock related options? caocangmou
09:05 PowerPC debugger ? Matthieu . GIRARDIN
08:52 Re: How to set clock related options? Satish Kumar
08:47 How to set clock related options? caocangmou
07:08 RE: Using JTAG on a EB40a Øyvind Harboe
06:27 Using JTAG on a EB40a Sven Rehfuss
02:18 Re: DSR not called from ISR (Real Time Clock) Satish Kumar

September 24, 2003
23:02 RE: SPAM? (was Re: Last chance for the Seminar Tour CD) Gregg C Levine
19:11 Re: how to startup the ecos from Linux? Gary Thomas
18:35 SPAM? (was Re: Last chance for the Seminar Tour CD) Christopher Faylor
18:27 how to startup the ecos from Linux? b8944004
18:27 how to get redboot.ram image Ramprasad
18:12 Re: EB40LS ping_test problem Daniel Néri
18:10 Re: How to Make .epk. How to Make .ldi. Grant Edwards
18:09 Last chance for the Seminar Tour CD Kristina Littmarck
18:09 cyg_thread_delay() only works before diag_printf() in AT91 EB55 ?!!! Claudio Leonel
11:15 Re: How to Make .epk. How to Make .ldi. Peter Soetens
10:23 DSR not called from ISR (Real Time Clock) Satish Kumar
10:03 Re: EB40LS ping_test problem RandyLin
10:02 Re: How to Make .epk. How to Make .ldi. Jani Monoses
09:52 How to Make .epk. How to Make .ldi. Haibo Tang (QD/LJC)
09:33 recent breakage of fis_free Jani Monoses
09:03 Re: THUMB/eCos application did not run in AT91 Eric de Jong
07:31 Re: THUMB/eCos application did not run in AT91 Laurent GONZALEZ
06:53 Re: Fwd: ecos minimum configuration Jani Monoses
05:27 Re: ecos scheduler start in clocktruth.cxx Satish Kumar
05:25 Fwd: ecos minimum configuration Dhanashri
04:02 ecos scheduler start in clocktruth.cxx Satish Kumar
01:07 Re: clock interrupt fails to call unlock_inner() Satish Kumar
01:07 Powerfull python script to generate packages/templates/targets Peter Soetens
01:02 Re: clock interrupt fails to call unlock_inner() Satish Kumar

September 23, 2003
19:29 THUMB/eCos application did not run in AT91 Claudio Leonel
18:27 Re: RedBoot DHCP broken? Chris Garry
17:06 Re: RedBoot DHCP broken? Gary Thomas
17:03 Re: RedBoot DHCP broken? Chris Garry
16:53 Re: RedBoot DHCP broken? Chris Garry
16:13 Re: RedBoot DHCP broken? Gary Thomas
15:51 RedBoot DHCP broken? Chris Garry
15:51 PPP Stack Retallack, Mark (Siemens)
12:02 Re: clock interrupt fails to call unlock_inner() Nick Garnett
11:51 Re: eCos math problem Gary Thomas
11:50 Re: Problem with THUMB mode with AT91 Andrew Lunn
11:32 Re: Keeping 2.0 source tree up to date David Vrabel
11:04 eCos math problem Daniel Lidsten
11:03 Re: Keeping 2.0 source tree up to date Reinhard JESSICH
10:56 ecos minimum configuration Dhanashri
09:37 test Dhanashri
08:21 Re: clock interrupt fails to call unlock_inner() Satish Kumar
07:43 Re: Keeping 2.0 source tree up to date John Dallaway
07:42 clock interrupt fails to call unlock_inner() Satish Kumar
06:45 Re: Problem with THUMB mode with AT91 Eric de Jong
05:14 Sega Dreamcast issues Gregg C Levine

September 22, 2003
22:35 Re: Fix in clock.cxx Nick Garnett
19:34 Re: Keeping 2.0 source tree up to date Grant Edwards
19:29 MW and posix threads Savin Zlobec
19:29 Re: Keeping 2.0 source tree up to date Gary Thomas
19:20 Re: Keeping 2.0 source tree up to date Grant Edwards
19:11 Re: Keeping 2.0 source tree up to date Gary Thomas
18:59 Re: Keeping 2.0 source tree up to date Grant Edwards
16:31 Re: Fix in clock.cxx Gary Thomas
16:27 Re: Fix in clock.cxx Christoph Csebits
16:06 Re: Fix in clock.cxx Gary Thomas
15:48 Fix in clock.cxx Christoph Csebits
15:17 Re: Keeping 2.0 source tree up to date Andrew Lunn
14:59 RE: FW: POSIX problems during ARM simulations Chip Boling
14:44 Keeping 2.0 source tree up to date Grant Edwards
14:42 Re: Fix for OpenBSD stack Andrew Lunn
14:36 Fix for OpenBSD stack Christoph Csebits
12:52 Problem with THUMB mode with AT91 Claudio Leonel
12:31 Re: serial.c problem !! Gary Thomas
12:24 Why the touch screen and the keyboard of IPAQ H3630 can't be used on microwindows? b8944004
12:17 Re: debugging rtc clock counter value Gary Thomas
11:50 serial.c problem !! Dinesh Kumar
09:30 Building RedBoot without GDB stubs Chris Garry
09:27 Re: EB40LS ping_test problem Andrew Lunn
09:11 libcdl : refactoring proposal Peter Soetens
09:04 What are the correct steps to make a image(ecos+microwindows) that start-up from WinCE (Ipaq 3630)? b8944004
07:52 cxxsupp.cxx test fails Satish Kumar
07:31 Re: PCI Ethernet card (ETH1 issue) Eric Doenges
07:20 Re: how to read from serial port 2 !! Eric Doenges
07:12 Re: EB40LS ping_test problem RandyLin
06:48 debugging rtc clock counter value Satish Kumar

September 21, 2003
19:22 Re: executing application in ROM results in SIGBUS Michael Anburaj
14:58 Re: question about install eCos with redboot Gary Thomas
14:53 question about install eCos with redboot b8944028
13:22 RE: Re: mutex and mailbox query Savin Zlobec
11:07 Re: Re: mutex and mailbox query Andrew Lunn
10:34 RE: Re: mutex and mailbox query Hans Dermot Doran
09:43 executing application in ROM results in SIGBUS rakesh
08:40 Re: how to control header file inclusion ? Andrew Lunn
07:49 a question about the microwindows API of microwindows mayasky
02:23 Re: how to control header file inclusion ? rakesh

September 20, 2003
21:48 Re: Re: mutex and mailbox query Savin Zlobec
21:28 Re: Re: mutex and mailbox query Andrew Lunn
21:17 Re: Re: mutex and mailbox query Savin Zlobec
20:52 Re: EB40LS ping_test problem Andrew Lunn
20:47 Re: Re: mutex and mailbox query Andrew Lunn
20:42 Re: mutex and mailbox query Andrew Lunn
20:32 Re: license question Andrew Lunn
19:20 Re: mutex and mailbox query Savin Zlobec
14:23 Re: YES! redboot and eb40a success story :) Konstantin Kletschke
12:17 Re: how to control header file inclusion ? Gary Thomas
12:07 mutex and mailbox query Hans Dermot Doran
11:41 Question on VSR , ISR theoharis tsenis
11:26 Re: Assertion generated for Scheduler lock == 0 sandeep
06:23 how to control header file inclusion ? rakesh
05:11 Assertion generated for Scheduler lock == 0 radhakrishnan R
02:08 RE: PCI Ethernet card (ETH1 issue) Michael Anburaj
01:52 Re: how to read from serial port 2 !! mohanlal jangir

September 19, 2003
22:15 Re: which hardware should I choose? Gary Thomas
22:11 which hardware should I choose? Chien-Lung Wu
21:26 Re: FW: POSIX problems during ARM simulations Gary Thomas
20:57 FW: POSIX problems during ARM simulations Chip Boling
19:01 Re: YES! redboot and eb40a success story :) Øyvind Harboe
17:22 Hitach H8S interrupt handling. Uwe Kindler
16:25 Re: YES! redboot and eb40a success story :) Konstantin Kletschke
15:36 license question mbs
08:41 Re: problem with the RealTimeClock ISR routine "return" instruction Satish Kumar
08:28 RE: problem with the RealTimeClock ISR routine "return" instruction Robert Cragie
08:18 Re: how to read from serial port 2 !! Eric Doenges
07:24 RE: YES! redboot and eb40a success story :) Øyvind Harboe
07:22 problem with the RealTimeClock ISR routine "return" instruction Satish Kumar
05:14 how to read from serial port 2 !! mohanlal jangir
04:40 Re: YES! redboot and eb40a success story :) Greg Holdren
03:30 RE: cyg_thread_delay problem? =?big5?b?IldhbmcsIEFsdmluICik/
01:57 Re: EB40LS ping_test problem RandyLin

September 18, 2003
20:33 SV: Memory layout Øyvind Harboe
19:43 YES! redboot and eb40a success story :) Konstantin Kletschke
19:42 Re: Bugs in FreeBSD stack fixed ... Gary Thomas
14:09 Re: float powerpc instruction ! please help ! Gary Thomas
14:07 float powerpc instruction ! please help ! Matthieu . GIRARDIN
13:39 RE: float powerpc instruction impossible ! please help me ! Matthieu . GIRARDIN
13:33 RE: float powerpc instruction impossible ! please help me ! Matthieu . GIRARDIN
13:27 Re: float powerpc instruction impossible ! please help me ! Gary Thomas
13:21 float powerpc instruction impossible ! please help me ! Matthieu . GIRARDIN
11:26 Re: How to start ReBoot/eCos app from DOS or as BIOS extension? David Vrabel
10:54 How to start ReBoot/eCos app from DOS or as BIOS extension? Christian Axbrink
10:23 Re: Configtool 2.12.net Bug : *last* package in ecos.db, doesn't show up in package listing Chris Garry
10:19 Configtool 2.12.net Bug : *last* package in ecos.db, doesn't show up in package listing sandeep
09:43 cyg_thread_delay problem? =?big5?b?IldhbmcsIEFsdmluICik/
07:32 Re: isr routine does not invoke for RTC interrupt Satish Kumar
07:31 Memory layout Matthieu . GIRARDIN
07:20 Re: Bad next thread Andrew Lunn
07:07 Full or half duplex in MPC8xx QUICC ethernet driver if_quicc.c ? Tord Andersson
04:28 Bad next thread suraj kumar
04:07 cyg_thread_delay problem? =?big5?b?IldhbmcsIEFsdmluICik/
03:54 RE: PCI Ethernet card (DHCP issue) Andy Dyer

September 17, 2003
16:56 help on floppy theoharis tsenis
16:20 Bugs in FreeBSD stack fixed ... Thomas BINDER
16:13 Re: isr routine does not invoke for RTC interrupt Michael Anburaj
14:49 How to know if scheduler has started? Grant Edwards
13:26 MPLS Adolfo Lucha
13:25 Re: PCI Ethernet card (DHCP issue) Eric Doenges
10:25 Re: isr routine does not invoke for RTC interrupt Andrew Lunn
10:22 Re: PCI Ethernet card (DHCP issue) Andrew Lunn
10:17 Re: isr routine does not invoke for RTC interrupt Satish Kumar
10:14 Re: isr routine does not invoke for RTC interrupt Andrew Lunn
09:50 isr routine does not invoke for RTC interrupt Satish Kumar
09:43 Re: EB40LS ping_test problem Andrew Lunn
09:18 EB40LS ping_test problem RandyLin
05:52 Re: PCI Ethernet card (DHCP issue) Michael Anburaj
02:23 isr for cyg_thread_delay Satish Kumar

September 16, 2003
22:50 Re: How to build redboot/ecos? Gary Thomas
22:43 Re: How to build redboot/ecos? amassa at san dot rr dot com
22:28 How to build redboot/ecos? Chien-Lung Wu
21:41 RE: Bug in getifaddrs() - allocation of buffer Jay Foster
20:36 Re: compiling redboot -> File truncated Konstantin Kletschke
16:55 Re: Bug in getifaddrs() - allocation of buffer Gary Thomas
16:37 Re: Bug in getifaddrs() - allocation of buffer Andrew Lunn
15:58 Re: compiling redboot -> File truncated Gary Thomas
15:55 Re: compiling redboot -> File truncated Konstantin Kletschke
15:34 Re: compiling redboot -> File truncated Andrew Lunn
15:33 Bug in getifaddrs() - allocation of buffer Jay Foster
15:25 Re: compiling redboot -> File truncated Konstantin Kletschke
15:11 Adding 16550 drivers to the EB40a target Øyvind Harboe
11:12 newlib includes Fredrik Hederstierna
10:36 Re: redboot bott error Iztok Zupet
10:32 Re: compiling redboot -> File truncated Andrew Lunn
10:07 Re: compiling redboot -> File truncated Konstantin Kletschke
10:02 Re: compiling redboot -> File truncated Andrew Lunn
09:52 redboot bott error theoharis tsenis
09:24 compiling redboot -> File truncated Konstantin Kletschke
03:06 Re: Configtools with cygwin: Library generating problem John Dallaway
02:55 redboot porting yu weiping
02:28 Re: cyg_thread_delay() trace!! Satish Kumar

September 15, 2003
22:29 RE: newbie:application not run Oscar
15:59 Re: eCos amassa at san dot rr dot com
13:45 RE: newbie:application not run Gary Thomas
13:45 RE: newbie:application not run Oscar
13:35 Re: Anyone have lwIP working under eCos? Andrew M Hoerter
13:26 Re: Anyone have lwIP working under eCos? Andrew M Hoerter
13:16 Re: newbie:application not run Gary Thomas
13:00 newbie:application not run Oscar
12:30 Configtools with cygwin: Library generating problem e . coullien
12:04 Re: Question on FIS Jani Monoses
11:48 Question on FIS Pred
06:57 Re: PCI Ethernet card (DHCP issue) Eric Doenges
06:28 Re: Anyone have lwIP working under eCos? Savin Zlobec
06:22 Re: Anyone have lwIP working under eCos? Jani Monoses

September 14, 2003
19:31 Anyone have lwIP working under eCos? Andrew M Hoerter
08:35 Re: PCI Ethernet card (DHCP issue) Andrew Lunn
00:53 Re: PCI Ethernet card (DHCP issue) Michael Anburaj

September 13, 2003
15:27 Re: ecos Andrew Lunn
13:54 Re: Question about exec the linux 2.4.19-rmk7-pxa3 Mark Salter
11:13 Re: Question about exec the linux 2.4.19-rmk7-pxa3 Gary Thomas
11:03 Question about exec the linux 2.4.19-rmk7-pxa3 Pred
07:14 ecos piyali probodh de
01:01 Re: Query about eCos scheduler Gary Thomas
00:25 Re: Query about eCos scheduler mohanlal jangir

September 12, 2003
22:50 Question on ISA DMA memory John Wasinger
16:39 Question on PCI DMA memory kevin_lemay
14:32 Re: Query about eCos scheduler Nick Garnett
13:54 Re: FW: Newbie: register access martinos72\ at libero\ dot it
12:00 Re: FW: Newbie: register access Gary Thomas
11:58 Re: Setting Mac Address Gary Thomas
11:19 FW: Newbie: register access Oscar
11:10 Re: racoon working with eCos Andrew Lunn
11:06 Re: Replace eCos idle thread Andrew Lunn
10:59 Re: racoon working with eCos sandeep
10:55 Re: Replace eCos idle thread Andrew Lunn
10:45 Re: Replace eCos idle thread Chris Garry
10:43 Re: racoon working with eCos Andrew Lunn
10:42 Re: Replace eCos idle thread Chris Garry
10:33 RE: Replace eCos idle thread Daniel Lidsten
10:30 Re: eCos net threads Andrew Lunn
10:23 RE: Replace eCos idle thread Robert Cragie
10:23 Setting Mac Address amspa s
10:22 Re: file system on eCos !! Andrew Lunn
09:48 Re: Replace eCos idle thread sandeep
09:35 Re: Replace eCos idle thread Piotr Trojanek
09:20 racoon working with eCos sandeep
09:19 eCos net threads Daniel Lidsten
07:36 FW: [openrisc] eCos port for openrisc Robert Cragie
07:02 Replace eCos idle thread Daniel Lidsten
06:59 Re: file system on eCos !! sandeep
03:31 Re: cyg_thread_delay() trace!! Gary Thomas
03:27 Re: cyg_thread_delay() trace!! Satish Kumar
03:08 Re: cyg_thread_delay() trace!! Gary Thomas
03:02 cyg_thread_delay() trace!! Satish Kumar
00:21 file system on eCos !! rakesh

September 11, 2003
13:37 Problems with ROMRAM on EB40a Øyvind Harboe
13:36 Query about eCos scheduler Ravi Joshi
12:35 Re: Creating UART driver Eric Doenges
12:24 Re: Creating UART driver Gary Thomas
12:20 Creating UART driver eibach
12:16 .../ecos_install/include/cyg/posix/export.h:100: parse error before `*' token david o'farrell
11:11 Problems with ROMRAM on EB40a Øyvind Harboe
10:29 Re: ecos build system remarks (configtool/ecosconfig) Peter Soetens
09:54 Re: Timing considerations Andrew Lunn
09:52 Re: Addition: ecos build system remarks (configtool/ecosconfig) Andrew Lunn
09:38 Re: ecos build system remarks (configtool/ecosconfig) Andrew Lunn
09:31 Re: Timing considerations eibach
09:23 Addition: ecos build system remarks (configtool/ecosconfig) Peter Soetens
09:11 ecos build system remarks (configtool/ecosconfig) Peter Soetens
08:37 what causes the management port of switch don't work. Harry Lou
08:00 eCos demo: "scivoli" David N. Welton
06:47 Re: Timing considerations Andrew Lunn
06:35 Re: Timing considerations Eric Doenges
06:22 Re: arm-v5t compatible Jani Monoses
06:07 arm-v5t compatible Satish Kumar
06:04 Timing considerations eibach
02:30 Re: how can i know the ecos version Gary Thomas
02:24 Re: problem regarding exec command in redboot Gary Thomas
02:14 how can i know the ecos version Harry Lou
01:01 c++ runtime fails to compile Satish Kumar
00:22 problem regarding exec command in redboot Pred
00:22 OpenSSL Jonathan Larmour

September 10, 2003
16:43 Re: strataflash functions in RAM Gary Thomas
16:41 strataflash functions in RAM Jani Monoses
14:26 Re: serial line ISR problem -- again:( Piotr Trojanek
14:21 Re: serial line ISR problem -- again:( Gary Thomas
14:16 Re: serial line ISR problem -- again:( Piotr Trojanek
13:48 EB40a flash programming, interrupts and multithreading Øyvind Harboe
13:41 Re: serial line ISR problem -- again:( Piotr Trojanek
13:29 Re: buzzer on PC Piotr Trojanek
13:29 Re: serial line ISR problem -- again:( Eric Doenges
12:55 Re: serial line ISR problem -- again:( Piotr Trojanek
11:35 Re: serial line ISR problem -- again:( Piotr Trojanek
11:32 Re: Fwd: Packet size limit on TCP/IP stack ? - success mohanlal jangir
11:11 Re: serial line ISR problem -- again:( Piotr Trojanek
11:03 ecos.db generator script in python Peter Soetens
10:23 Re: Fwd: Packet size limit on TCP/IP stack ? mohanlal jangir
09:17 RE: serial line ISR problem -- again:( Robert Cragie
08:43 Antw: Re: Receiving Multicast Packets on a socket Adolfo Lucha
08:40 Re: serial line ISR problem -- again:( Piotr Trojanek
08:37 Re: serial line ISR problem -- again:( Piotr Trojanek
07:50 Re: cyg mem Info Andrew Lunn
07:43 Re: Receiving Multicast Packets on a socket Andrew Lunn
07:10 Receiving Multicast Packets on a socket Adolfo Lucha
07:07 cyg mem Info Chaitanya
06:51 Re: ?^?H?G Re: EB40LS ethernet card problem Andrew Lunn
06:42 Re: how to read statistical counters of 82559 !!! - success Andrew Lunn
06:25 Re: how to read statistical counters of 82559 !!! - success mohanlal jangir
03:14 FCR register doesn't exist in AEB-1 Carlos Sobrinho
02:07 =?big5?b?pl6rSKFHIFJlOiBbRUNPU10gRUI0MExTIGV0aGVybmV0IGNhcmQgcHJvYmxlbQ==?= RandyLin
01:58 how to read statistical counters of 82559 !!! mohanlal jangir

September 09, 2003
13:08 Re: Can't build gcc 3.2 using gcc 3.2 on Cygwin? Grant Edwards
13:01 RE: serial line ISR problem -- again:( Robert Cragie
12:09 Re: serial line ISR problem -- again:( Eric Doenges
12:07 Re: Fwd: Packet size limit on TCP/IP stack ? Andrew Lunn
11:29 Re: Fwd: Packet size limit on TCP/IP stack ? mohanlal jangir
11:07 Re: EB40LS ethernet card problem Andrew Lunn
10:52 Re: Fwd: Packet size limit on TCP/IP stack ? Andrew Lunn
10:41 Re: Fwd: Packet size limit on TCP/IP stack ? mohanlal jangir
10:37 EB40LS ethernet card problem RandyLin
09:57 Re: LCD example driver request Savin Zlobec
08:44 Re: serial line ISR problem -- again:( Piotr Trojanek
08:14 LCD example driver request Oscar
08:08 Re: Can't build gcc 3.2 using gcc 3.2 on Cygwin? RomanJordan
08:05 Re: Can't build gcc 3.2 using gcc 3.2 on Cygwin? Andrew Lunn
07:59 Re: Fwd: Packet size limit on TCP/IP stack ? Andrew Lunn
07:54 RE: Can't build gcc 3.2 using gcc 3.2 on Cygwin? Øyvind Harboe
07:48 Re: Fwd: Packet size limit on TCP/IP stack ? mohanlal jangir
07:46 Re: serial line ISR problem -- again:( Eric Doenges
06:42 Re: Fwd: Packet size limit on TCP/IP stack ? Andrew Lunn
01:37 Re: Fwd: Packet size limit on TCP/IP stack ? mohanlal jangir

September 08, 2003
21:33 Re: Can't build gcc 3.2 using gcc 3.2 on Cygwin? Grant Edwards
21:26 Multi ICE RDI and GDB Eric BENARD / Free
19:33 Re: eCos build with other toolsets? Andrew Lunn
18:42 eCos build with other toolsets? John Penn
17:17 Re: serial line ISR problem -- again:( Piotr Trojanek
17:13 serial line ISR problem -- again:( Piotr Trojanek
16:38 DSR does not run (pci interrupt on MPC8245) paape
16:07 Re: Can't build gcc 3.2 using gcc 3.2 on Cygwin? Grant Edwards
15:38 Re: buzzer on PC David N. Welton
15:25 Re: assertion failed with msg "stack top alignment" Andrew Lunn
15:21 Re: Footprint of an ecos application Andrew Lunn
14:50 Re: Correction of baudrate calculation for QUICC SMC uart Gary Thomas
14:23 Re: Multiple thread support in eCos Andrew Lunn
14:04 Re: Multiple thread support in eCos Ravi Joshi
13:46 Re: Multiple thread support in eCos Andrew Lunn
13:38 buzzer on PC Piotr Trojanek
13:12 Multiple thread support in eCos Ravi Joshi
12:02 Re: masked interrupt source and DSR Gary Thomas
11:55 masked interrupt source and DSR Backhaus Willy
11:35 Footprint of an ecos application Reinhard JESSICH
11:03 assertion failed with msg "stack top alignment" rakesh
06:58 Correction of baudrate calculation for QUICC SMC uart Tord Andersson

September 06, 2003
20:02 RE: Thank you. Jobs
15:14 Re: socket times out, but not with printf Andrew Lunn
15:06 Re: socket times out, but not with printf mailsagr at yahoo dot com
14:58 Re: Unresolved external -- read_random() Andrew Lunn
11:28 Open-Source Wireless OS(Developers Wanted) support
09:30 Re: mount()/umount() prototypes Savin Zlobec
08:34 Re: socket times out, but not with printf Andrew Lunn
07:36 Re: Newbie: Linux programming enviroment David N. Welton
02:46 nnb 123
02:31 Newbie: Linux programming enviroment Lee Davies
02:04 Re: Can't build gcc 3.2 using gcc 3.2 on Cygwin? Grant Edwards
00:32 Re: mount()/umount() prototypes Nick Garnett
00:14 socket times out, but not with printf mailsagr at yahoo dot com

September 05, 2003
22:40 Re: Can't build gcc 3.2 using gcc 3.2 on Cygwin? Gary Thomas
22:17 Can't build gcc 3.2 using gcc 3.2 on Cygwin? Grant Edwards
18:56 Re: Re: mount()/umount() prototypes Savin Zlobec
17:07 Re: Re: mount()/umount() prototypes Nick Garnett
14:03 Re: Fwd: Packet size limit on TCP/IP stack ? Jonathan Larmour
14:00 Re: Re: mount()/umount() prototypes Savin Zlobec
13:31 Re: Re: mount()/umount() prototypes Thomas Koeller
12:32 Re: mount()/umount() prototypes Savin Zlobec
12:19 mount()/umount() prototypes Thomas Koeller
12:07 Re: pkg config admin tool!! John Dallaway
11:52 Re: Fwd: Packet size limit on TCP/IP stack ? mohanlal jangir
11:42 RE: Timers and RTC timer. Robert Cragie
11:38 Re: ecosif_input Savin Zlobec
11:32 Re: ecosif_input Jani Monoses
11:22 ecosif_input Stuart Park
10:36 LCD example driver request Oscar
06:29 Timers and RTC timer. Satish Kumar
04:27 SBS Powerpc 755 Bujji
02:21 where prtntf dumps while using multi-ice-gdb-server ? rakesh

September 04, 2003
19:37 RE: Entering GDB stubs from an application Doyle, Patrick
19:14 RE: Entering GDB stubs from an application Gary Thomas
19:07 RE: Entering GDB stubs from an application Doyle, Patrick
19:01 Re: Entering GDB stubs from an application Gary Thomas
18:56 Entering GDB stubs from an application Doyle, Patrick
18:02 DY4 Powerpc SVME 177 madhu1
16:33 Unresolved external -- read_random() Matt Jerdonek
14:54 RE: HAL_CLOCK_XXXX routines and RTC time period Robert Cragie
14:25 Re: Building older eCos w/ gcc 3.2.1? Grant Edwards
14:18 Re: Building older eCos w/ gcc 3.2.1? Gary Thomas
14:12 Building older eCos w/ gcc 3.2.1? Grant Edwards
14:06 i386-elf-gcc multi-lib patch for software FP David Vrabel
14:03 Sh2 7145 Support James Yates
12:45 pkg config admin tool!! subin abraham
10:40 Re: HAL PPC ??? Frank Robbins
10:27 RE: Releasing Code into the Community Lee Davies
07:39 HAL_CLOCK_XXXX routines and RTC time period Satish Kumar
06:43 Re: Re: lwip - Ethernet 2 Savin Zlobec
06:10 eCos Thread debugging using Multi-ICE mohanlal jangir

September 03, 2003
22:44 SH3 ROMRAM version Rod Campbell
15:09 RE: libc stdio package dependency wrong? Koeller, T.
15:01 HAL PPC ??? Matthieu . GIRARDIN
14:08 Re: Address calculation in RedBoot load function Gary Thomas
13:54 Re: Address calculation in RedBoot load function Wolfram Kattanek
13:31 Re: Address calculation in RedBoot load function Gary Thomas
13:26 Address calculation in RedBoot load function Wolfram Kattanek
13:25 Re: Re: lwip - Ethernet 2 Stuart Park
11:36 Re: eCos2 build error Vikas K. Prasad
10:25 Re: REGISTER_BYTES undeclared !! mohanlal jangir
08:26 RE: hybrid kernel David Marqvar (DAM)
07:37 eCos2 build error Vikas K. Prasad
06:21 Re: GDB doesn't stop eibach
05:42 REGISTER_BYTES undeclared !! mohanlal jangir
03:15 Re: libc stdio package dependency wrong? Jonathan Larmour
03:14 Re: hybrid kernel Jonathan Larmour
03:13 Re: Fwd: Packet size limit on TCP/IP stack ? Jonathan Larmour
03:09 Re: ConfigTool platform definitions? Jonathan Larmour
03:07 Re: libc stdio package dependency wrong? Jonathan Larmour
03:03 Re: SIGILL ?? Jonathan Larmour
03:01 Re: GDB doesn't stop Jonathan Larmour
03:00 Re: debug_info causing problem with multi-ice Jonathan Larmour
01:52 hybrid kernel Satish Kumar
00:32 Fwd: Packet size limit on TCP/IP stack ? 권순환

September 02, 2003
22:07 ConfigTool platform definitions? John Wasinger
22:05 Re: missing (?) memory declaration on the EB40 Daniel Néri
17:22 Re: missing (?) memory declaration on the EB40 Nick Garnett
16:25 Re: eCos and OpenSSL Gary Thomas
15:10 RE: Releasing Code into the Community Retallack, Mark (Siemens)
14:34 Re: GDB doesn't stop Laurent GONZALEZ
14:24 RE: missing (?) memory declaration on the EB40 Koeller, T.
14:07 RE: Serial upload protocol Doyle, Patrick
13:11 eCos and OpenSSL subin abraham
12:07 missing (?) memory declaration on the EB40 Artur Lipowski
11:14 libc stdio package dependency wrong? Koeller, T.
10:38 SIGILL ?? rakesh
09:42 GDB doesn't stop eibach
06:50 debug_info causing problem with multi-ice mohanlal jangir
03:29 Re: PPP Jonathan Larmour
03:27 Re: trivial question about cpu thumb mode Jonathan Larmour
03:14 Re: Re: Major misuse of cyg_bool ? Jonathan Larmour
03:10 Re: Restoring boot/ecos on a AEB-1 using JTAG/Wiggler? Jonathan Larmour
03:02 Re: eCos kernel image size Jonathan Larmour
02:57 Re: how to debug redboot !! Jonathan Larmour
02:51 Re: Clock/interrupt latency Jonathan Larmour
02:45 Re: hello world doesnt run Jonathan Larmour
02:44 Re: R: Timing with longjmp Jonathan Larmour
02:43 Re: About "File I/O operations via GDB" Jonathan Larmour
02:40 Re: Serial upload protocol Jonathan Larmour
02:37 Re: ROMRAM start on ARM platform Jonathan Larmour
02:34 Re: ROMRAM start on ARM platform Jonathan Larmour
02:22 Re: Releasing Code into the Community Jonathan Larmour
02:17 Re: Interrupts ? oops ! Jonathan Larmour

September 01, 2003
21:13 [Commercial] eCos PPP stack Alex Schuilenburg
17:07 Re: About "File I/O operations via GDB" Nick Garnett
14:54 ecos2.vsr.si died Iztok Zupet
14:33 Re: eCos and Raw Socket!! Andrew Lunn
14:30 eCos and Raw Socket!! subin abraham
13:31 Re: Testing interrupts ??? Bart Veer
13:07 68K targets Hans Dermot Doran
12:08 Re: lwip - Ethernet 2 Savin Zlobec
10:59 lwip - Ethernet 2 Stuart Park
09:28 Updated FAT16 Savin Zlobec
07:15 Interrupts ? oops ! Matthieu . GIRARDIN
07:10 Interrupts ? Matthieu . GIRARDIN

Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:
Mail converted by MHonArc 2.6.3