This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Correction of baudrate calculation for QUICC SMC uart


On Mon, 2003-09-08 at 00:58, Tord Andersson wrote:
> Hi,
> 
> When using higher baudrates in an MPC823e based system using eCos and
> the SMC UART, I found that the baudrate was slightly wrong. I checked
> the baudrate calculation and believe that it could be somewhat altered. 
> The change has solved our problem. 
> Below is the result of "diff -u -5 -b -p" between the original and the
> patched file for review.
> The file is located in
> .../packages/devs/serial/powerpc/quicc/current/src
> 
> ---------------------------------------
> 
> --- quicc_smc_serial.h	Thu Sep  4 08:50:14 2003
> +++ patched_quicc_smc_serial.h	Thu Sep  4 09:04:26 2003
> @@ -130,8 +130,8 @@
>      0,      // 230400
>  };
>  
> -#define UART_BITRATE(n)
> (((CYGHWR_HAL_POWERPC_BOARD_SPEED*1000000)/16)/n)
> -#define UART_SLOW_BITRATE(n)
> ((CYGHWR_HAL_POWERPC_BOARD_SPEED*1000000)/n))
> +#define UART_BITRATE(n)
> ((((CYGHWR_HAL_POWERPC_BOARD_SPEED*1000000)/16)/n)-1)
> +#define UART_SLOW_BITRATE(n)
> (((CYGHWR_HAL_POWERPC_BOARD_SPEED*1000000)/n))-1)
>  
>  // Channel type select
>  #define _SCC_CHAN 0
> 
> --------------------------------------

Yes, it does look like you are correct.  I'll make these changes.

Thanks.

-- 
Gary Thomas <gary@mlbassoc.com>
MLB Associates


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]