This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: PCI Ethernet card (ETH1 issue)
- From: Eric Doenges <Eric dot Doenges at DynaPel dot com>
- To: Michael Anburaj <embeddedeng at hotmail dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Mon, 22 Sep 2003 09:31:46 +0200
- Subject: Re: [ECOS] PCI Ethernet card (ETH1 issue)
- References: <Law15-F89uJ7C7S83K0000254ac@hotmail.com>
Michael Anburaj wrote:
Hi,
Thanks to evenone.
I tried the ping_test & it works fine <After doing DHCP, it pings the
server & Also tried a bogus IP>. But when I tried the same test with the
same driver, change all reference to ETH0 --> ETH1 the ping_test -- gets
the IP address through DHCP & after that, while tring to ping --- it?s
hitting the ISR but not the DSR, so it fails. Any clues?
This only seems possible if CYGPKG_DEVS_ETH_RLTK_8139_SHARE_INTERRUPTS
is set and the interrupt is not for the 8139 in question. In all other
cases the standard generic ethernet DSR should be called.
--
--------------------------------------------------------------------
| Eric Doenges | DynaPel Laboratories GmbH |
| Tel: +49 89 962428 23 | Fraunhoferstrasse 9/2 |
| Fax: +49 89 962428 90 | D - 85737 Ismaning, Germany |
--------------------------------------------------------------------
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss