This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Redboot on AT91EB55
- From: Roman Jordan <RomanJordan at gmx dot de>
- To: Gatien Gillon <ggillon at ulb dot ac dot be>
- Cc: Ecos Discuss <ecos-discuss at sources dot redhat dot com>
- Date: 15 Oct 2003 23:37:06 +0200
- Subject: Re: [ECOS] Redboot on AT91EB55
- Organization:
- References: <008101c39339$22d6d770$0a00000a@shuttle>
Hi,
i don't know exactly what you mean.
Do you have problems using gdb on cygwin?
Before you can set the cpsr register you need to connect to target
(angel need the rdi target). This can be done using the following
command:
target rdi
or
target rdi s=/dev/com1
If so, do you also have problems during the connect angel and gdb?
The best way is to try it runnig linux as host. There are some problems
using the debugger and the cygwin environment.
greetings,
Roman
Am Mit, 2003-10-15 um 18.26 schrieb Gatien Gillon:
> first of all if I type the line : "(gdb) set $cpsr=0xd3" in GDB
> then the transmission on the .TEXT goes on forever (waited 5 minutes)
> without the line it transmits but when i type "cont" I an unable do to the
> ctrl-Z to suspend (using cygwin)
> If i close the windows then go to hyperterm I see nothing ...
> Thanks in advance ...
>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss