This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: New problem with building eCos--see output
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Gregg C Levine <hansolofalcon at worldnet dot att dot net>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: 11 Nov 2003 05:44:05 -0700
- Subject: Re: [ECOS] New problem with building eCos--see output
- Organization: MLB Associates
- References: <000e01c3a804$5fc09ce0$0100a8c0@who5>
On Mon, 2003-11-10 at 20:32, Gregg C Levine wrote:
> Hello from Gregg C Levine
> It seems I am forever having problems with eCos. This time during the
> building of Red Boot, the build process gets interrupted when it needs
> to decide if the board in question will have any flash memory. (It
> will, I don't know how much.) That step stops it from continuing from
> building any form of Red Boot. Prior to the inclusion of the ECM file
> for building a redboot.bin binary, it worked and I could get a
> redboot.elf file built. I've put the output from the whole process
> below my signature. The usual rules apply.
What platform is this for? How did you configure it?
What I can see from the dump you sent is that somehow you've enabled
the FLASH sub-system, but there are no FLASH drivers present. This
is not supposed to happen, so I'd like to know the steps you took
to get here.
--
Gary Thomas <gary@mlbassoc.com>
MLB Associates
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss