This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: New problem with building eCos--see output
- From: "Gregg C Levine" <hansolofalcon at worldnet dot att dot net>
- To: "'Gary Thomas'" <gary at mlbassoc dot com>
- Cc: <ecos-discuss at sources dot redhat dot com>
- Date: Tue, 11 Nov 2003 11:57:15 -0500
- Subject: RE: [ECOS] New problem with building eCos--see output
Hello (again) from Gregg C Levine
This is for an ordinary x86 based computer setup, something along the
lines of the unit that I used to build the binaries on. It's the I386
template.
-------------------
Gregg C Levine hansolofalcon@worldnet.att.net
------------------------------------------------------------
"The Force will be with you...Always." Obi-Wan Kenobi
"Use the Force, Luke."? Obi-Wan Kenobi
(This company dedicates this E-Mail to General Obi-Wan Kenobi )
(This company dedicates this E-Mail to Master Yoda )
> -----Original Message-----
> From: ecos-discuss-owner@sources.redhat.com [mailto:ecos-discuss-
> owner@sources.redhat.com] On Behalf Of Gary Thomas
> Sent: Tuesday, November 11, 2003 7:44 AM
> To: Gregg C Levine
> Cc: ecos-discuss@sources.redhat.com
> Subject: Re: [ECOS] New problem with building eCos--see output
>
> On Mon, 2003-11-10 at 20:32, Gregg C Levine wrote:
> > Hello from Gregg C Levine
> > It seems I am forever having problems with eCos. This time during
the
> > building of Red Boot, the build process gets interrupted when it
needs
> > to decide if the board in question will have any flash memory. (It
> > will, I don't know how much.) That step stops it from continuing
from
> > building any form of Red Boot. Prior to the inclusion of the ECM
file
> > for building a redboot.bin binary, it worked and I could get a
> > redboot.elf file built. I've put the output from the whole process
> > below my signature. The usual rules apply.
>
> What platform is this for? How did you configure it?
>
> What I can see from the dump you sent is that somehow you've enabled
> the FLASH sub-system, but there are no FLASH drivers present. This
> is not supposed to happen, so I'd like to know the steps you took
> to get here.
>
> --
> Gary Thomas <gary@mlbassoc.com>
> MLB Associates
>
>
> --
> Before posting, please read the FAQ:
http://sources.redhat.com/fom/ecos
> and search the list archive:
http://sources.redhat.com/ml/ecos-discuss
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss