This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Tcp Stack problems - CVS
- From: <kevin_lemay at agilent dot com>
- To: <ecos-discuss at sources dot redhat dot com>
- Date: Fri, 14 Nov 2003 11:48:15 -0700
- Subject: RE: [ECOS]Tcp Stack problems - CVS
I had to remove the enclosures to get this through to the list. I can send them separately if needed.
Kevin
-----Original Message-----
From: LEMAY,KEVIN (A-Roseville,ex1)
Sent: Friday, November 14, 2003 10:43 AM
To: ecos-discuss@sources.redhat.com
Subject: [ECOS]Tcp Stack problems - CVS
I am trying to get a TCP/IP application running on eCos. Everytime that eCos sets up a client socket and sends data, the socket is reset from eCos as soon as the ACK is received from the other system.
I have a windows echo server executable in the zip file, and the client eCos code, makefile and ecc file used to make the ecos image. (ecc based on Nov 7th CVS version)
I also am enclosing an ethernet trace. Line 151 shows the socket being connected. The data is sent on line 158, echoed data on 160 followed by the ecos reset on 161.
I tried this with both windows and linux servers with the same result. I also tried the 2.0 release with similar results.
Does anyone have a clue of what I may be doing wrong?
The tcp_io_test seems to run OK.
Thanks for any help,
Kevin
PS. I am inclosing the windows server source, in case you wanted to look at it.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss