This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: EDB7312(ARM720T) interrupts


On Fri, Nov 14, 2003 at 05:07:29PM -0500, Aaron Case wrote:
> Gary,
> 
> Many thanks, that cleared up my understanding of eCos interrupts a great
> deal.  Although, I still cant seem to achieve software connectivity with the
> eCos interrupt model.
> 
> While testing my interrupt code I have observed that I can assert bits in
> the interrupt status register by sending characters to a UART. As well as
> enabling them with cyg_interrupt_unmask() call(see below).
> 
> I, however, have not be able to get the ISR(and thus DSR) to execute(via
> break points with my MAJIC ICE).
> 
> In the case of the UART1 RX interrupt, I can send a character, verify its
> arrival at the buffer and FIFO, but no ISR or DSR is executed. Im assuming
> the problem is my software configuration(which is REALLY close to the Massa
> text).  See code below.

I don't see anywhere in your code where you program the serial chip to
actually enable it to generate interrupts. Also, does eCos provide a
serial driver for this chip? If so, that driver may already have the
interrupt.

        Andrew

-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]