This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: why flash package can not be added ?
- From: Roland Caßebohm <roland dot cassebohm at visionsystems dot de>
- To: Andrew Lunn <andrew at lunn dot ch>, zheng wujun <wj_zheng10 at hotmail dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Wed, 26 Nov 2003 10:23:29 +0100
- Subject: Re: [ECOS] why flash package can not be added ?
- References: <BAY13-F29sjbmDoP6j8000016f5@hotmail.com> <20031126084038.GM21161@lunn.ch>
On Mittwoch, 26. November 2003 09:40, Andrew Lunn wrote:
> On Wed, Nov 26, 2003 at 02:13:28AM +0000, zheng wujun wrote:
> > Thanks !!! all
> >
> > I also want to include the flash package to generate redboot.bin file,but
> > when I include flash package CYGPKG_IO_FLASH and compile sa below and
> > compile error will happen;Another,when I use configtool to generate the
> > redboot.bin file,this error also happened.
>
> You have added the generic flash layer, but there is no hardware
> specific flash driver for the SNDS.
>
> Does the SNDS have flash? If so, it looks like you need to write a
> driver for it. If its a well known flash chip, that should be
> reasonably easy.
>
> Andrew
Which FLASH do you use in the snds board? I could send you a package
for two Atmel AT29C040A used parallel, but I don't know which flashes
are inserted after shipping.
Roland
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss