ecos-discuss archive
date index for January, 2004

This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:

January 31, 2004
16:36 Re: "Threads on ecos" confirmation needed... Nick Garnett
14:27 Re: Per Thread Destructors Question Ivan Horvat
13:54 Re: "Threads on ecos" confirmation needed... Ivan Horvat
09:13 Re: "Threads on ecos" confirmation needed... Andrew Lunn
06:05 Jonathon Lamour Charlie
01:08 Re: PCI device driver questions John Newlin

January 30, 2004
23:38 Re: PCI device driver questions Gary Thomas
23:29 Re: Synth environment malloc seg faults under Fedora Linux Dan Jakubiec
22:21 PCI device driver questions John Newlin
22:03 Re: Synth environment malloc seg faults under Fedora Linux Bart Veer
21:38 Re: Re:Re: eCOS benchmarks Bart Veer
21:19 Re:Re: eCOS benchmarks Michael R. Arens
20:53 Re: "Threads on ecos" confirmation needed... Ivan Horvat
20:11 Re: "Threads on ecos" confirmation needed... Slawek
20:04 Re: Synth environment malloc seg faults under Fedora Linux Dan Jakubiec
20:00 Re: "Threads on ecos" confirmation needed... Ivan Horvat
19:25 Re: "Threads on ecos" confirmation needed... Ivan Horvat
18:57 Re: "Threads on ecos" confirmation needed... Slawek
18:48 RE: "Threads on ecos" confirmation needed... Dirk Broer
18:11 "Threads on ecos" confirmation needed... Ivan Horvat
16:37 Re: Synth environment malloc seg faults under Fedora Linux Bart Veer
16:23 Synth environment malloc seg faults under Fedora Linux Dan Jakubiec
16:00 rom Origin: 0x00000000 on VADS fails sai jayram
15:39 Re: Ctrl-c support in ISR Gary Thomas
15:36 Re: Use of mlt file Gary Thomas
15:35 Ctrl-c support in ISR Robert Cragie
15:32 Use of mlt file sai jayram
15:14 Re: mutexes again Nick Garnett
14:04 mutexes again Ronald Tubben
12:40 Run Tests "Cannot find the file specified" Kelvin Lawson
09:58 Re: PC nonblocking console I/O Nick Garnett
08:00 RE: mutexes R. Tubben

January 29, 2004
22:38 RE: PC nonblocking console I/O Richardson, Anthony
22:20 RE: PC nonblocking console I/O Gary Thomas
22:17 RE: PC nonblocking console I/O Richardson, Anthony
21:48 Re: PC nonblocking console I/O Gary Thomas
21:38 PC nonblocking console I/O Richardson, Anthony
20:21 Per Thread Destructors Question Jeffrey R. Szczepanski
16:43 Re: mutexes Sergei Organov
15:27 Re: mutexes Ronald Tubben
13:21 Re: mutexes Gary Thomas
10:02 mutexes Ronald Tubben

January 28, 2004
15:58 Re: Changing CPU clock frequency on the fly Bart Veer
14:50 Re: Thoughts of semaphore filesystem device to would behave like sock etpair() and/or pipe(). Nick Garnett
14:30 STLport with exception handling Oyvind Harboe
14:26 STLport with exception handling Oyvind Harboe
13:15 arm-elf-gdb incompatibility with cygwin1.dll 1.5.6-1 Øyvind Harboe
12:01 Re: Thoughts of semaphore filesystem device to would behavelike sock etpair() and/or pipe(). David Brennan
11:52 Re: Big archives from serial port Jani Monoses
11:30 Big archives from serial port Francesc teixido
08:53 Changing CPU clock frequency on the fly Gratian Crisan

January 27, 2004
17:07 Re: arm-elf-gdb incompatibility with cygwin1.dll 1.5.6-1 John Dallaway
17:03 Only return EWOULDBLOCK if no data moved Roland Caßebohm
10:27 similar eCos functions Ricardo Andrino
00:59 Hello (KMM1165726V65130L0KM) travelinfo at cheaptickets dot

January 26, 2004
18:54 Re: HAL Diagnostic Output Question Jeffrey R. Szczepanski
17:31 Re: Support for Motorola MCF5282 Daniel Néri
17:22 STLport and -fexceptions Øyvind Harboe
17:22 STLport and -fexceptions Øyvind Harboe
16:47 ecos install script on Cygwin Gregory Heinrich
16:39 Re: Support for Motorola MCF5282 Alex Schuilenburg
14:13 Re: Support for Motorola MCF5282 Alex Schuilenburg
13:03 Re: PowerPC mnemonics Peter Graf
12:08 arm-elf-gdb incompatibility with cygwin1.dll 1.5.6-1 Øyvind Harboe
11:45 Re: PowerPC mnemonics Nick Garnett
11:29 Re: PowerPC mnemonics Peter Graf
11:18 Re: PowerPC mnemonics Christoph Csebits
11:00 Re: PowerPC mnemonics Frank Robbins
10:56 Re: PowerPC mnemonics Peter Graf
10:48 Re: PowerPC mnemonics Frank Robbins
10:28 Re: PowerPC mnemonics Nick Garnett
09:16 PowerPC mnemonics Peter Graf
09:06 Re: Support for Motorola MCF5282 Peter Graf
08:24 Re: Thoughts of semaphore filesystem device to would behave like sock etpair() and/or pipe(). Andrew Lunn
08:12 Re: HAL Diagnostic Output Question Andrew Lunn

January 25, 2004
21:18 Re: Support for Motorola MCF5282 Dieter Schaefer
20:53 Re: Support for Motorola MCF5282 Alex Schuilenburg

January 24, 2004
19:27 HAL Diagnostic Output Question Jeffrey Szczepanski
16:22 Support for Motorola MCF5282 Michael Christmann

January 23, 2004
17:13 Re: Is there Ecos port for AT91RM9200? Ali Rodgo
14:06 Problem accessing the AT91MEC01 memory extension card on theAT91EB40 board Lawrence Mboweni
12:06 Is there Ecos port for AT91RM9200? Jose Pascual
09:41 [Patch] Selecting a release for ecos-install.tcl Peter Soetens
08:59 Re: eCos Configuration Tool for Windows Peter Graf
08:22 Re: eCos Configuration Tool for Windows John Dallaway

January 22, 2004
21:26 Thoughts of semaphore filesystem device to would behave like socketpair() and/or pipe(). Philip . Fleege
20:14 Re: eCos on PQ2FADS Gary Thomas
19:32 eCos on PQ2FADS Paul Randall
16:42 Re: eCos Configuration Tool for Windows Andrew Lunn
15:51 Re: eCos Configuration Tool for Windows Peter Graf
15:33 Re: Re: Wrong declaration of idle_thread_stack Eric de Jong
15:06 Re: eCos Configuration Tool for Windows Andrew Lunn
14:46 Re: char array alignment Nick Garnett
14:16 eCos Configuration Tool for Windows Peter Graf
14:05 Re: HTTPD library Wolfram Kattanek
13:53 HTTPD library Michael Trozzo
13:46 Re: Re: Wrong declaration of idle_thread_stack Uwe Kindler
13:27 Re: Re: Wrong declaration of idle_thread_stack Eric de Jong
12:44 Re: eCos application using USART Andrew Lunn
12:11 char array alignment Uwe Kindler
12:10 Re: eCos application using USART Ali Rodgo
11:31 Re: Re: Wrong declaration of idle_thread_stack Nick Garnett
11:18 RE: Update on the availability of socketpair()? Sébastien COURET
10:46 Re: Re: Wrong declaration of idle_thread_stack Uwe Kindler
10:15 Re: Update on the availability of socketpair()? Nick Garnett
09:58 Re: Re: Wrong declaration of idle_thread_stack Nick Garnett
09:25 Re: Update on the availability of socketpair()? Andrew Lunn
09:16 Re: Re: Wrong declaration of idle_thread_stack Andrew Lunn
08:29 Re: Re: Wrong declaration of idle_thread_stack Uwe Kindler
07:55 Re: support for mpc8xx in little endian mode Andrew Lunn
07:51 Re: Re: Wrong declaration of idle_thread_stack Eric de Jong
07:50 Re: (arm-elf) pointers to items in .data section incorrect after loading Eric de Jong
06:58 (arm-elf) pointers to items in .data section incorrect after loading George J. Pantazopoulos
05:39 support for mpc8xx in little endian mode jeansha
03:03 Re: Memory leak in ecosynth in abnormal situation. John Carter

January 21, 2004
21:28 Update on the availability of socketpair()? Philip . Fleege
19:12 Re: Wrong declaration of idle_thread_stack Uwe Kindler
15:42 Re: eCos application using USART Gary Thomas
15:28 Re: eCos application using USART Matt Jerdonek
15:00 Re: eCos application using USART Gary Thomas
14:47 Re: eCos application using USART Ali Rodgo
13:47 Re: Memory leak in ecosynth in abnormal situation. Bart Veer
13:01 Re: eCos application using USART Gary Thomas
12:43 Howto get basic STL running Øyvind Harboe
10:35 Re: eCos application using USART Jani Monoses
10:30 eCos application using USART Ali Rodgo
08:18 Re: configuring real eth1 for ecos eth0 Andrew Lunn
07:11 configuring real eth1 for ecos eth0 sen
02:02 Memory leak in ecosynth in abnormal situation. John Carter

January 20, 2004
21:48 Re: problem using SMC1 serial port of A&M Rattler as console agyhoo
21:26 Re: problem using SMC1 serial port of A&M Rattler as console Gary Thomas
21:20 Re: problem using SMC1 serial port of A&M Rattler as console agyhoo
19:45 Re: problem using SMC1 serial port of A&M Rattler as console Gary Thomas
19:31 Re: problem using SMC1 serial port of A&M Rattler as console agyhoo
16:43 Re: problem using SMC1 serial port of A&M Rattler as console Gary Thomas
16:39 Re: problem using SMC1 serial port of A&M Rattler as console agyhoo
16:13 Re: Howto get basic STL running eibach
15:48 Re: Howto get basic STL running Giovanni Perbellini
15:29 New FEMLAB Fall Tour CD Jill Goldberg
15:24 Re: problem using SMC1 serial port of A&M Rattler as console Gary Thomas
13:25 Re: RS-232 Implementation used for Redboot Jani Monoses
13:17 RS-232 Implementation used for Redboot Ali Rodgo
12:38 Re: CVS access via SSH Andrew Lunn
09:41 Re: CVS access via SSH Artur Lipowski
09:18 CVS access via SSH eibach
07:21 Re: Howto get basic STL running eibach
04:12 problem using SMC1 serial port of A&M Rattler as console agyhoo

January 19, 2004
15:11 RE: Need Ecos and Cygwin versions Richardson, Anthony
15:00 Re: Need Ecos and Cygwin versions Gary Thomas
13:47 Re: Need Ecos and Cygwin versions Gary Thomas
13:28 Re: Need Ecos and Cygwin versions Giri
13:01 Re: Howto get basic STL running Giovanni Perbellini
09:57 Re: Need Ecos and Cygwin versions John Dallaway
08:14 Re: Porting Problem with stdout Andrew Lunn
07:56 Re: Porting Problem with stdout dries
07:14 Re: Howto get basic STL running eibach
04:04 Need Ecos and Cygwin versions Giri
01:00 Re: RedBoot upload problem Gary Thomas

January 18, 2004
20:08 RedBoot upload problem Michael Trozzo

January 17, 2004
00:14 Re: Compiling without -g flag Gary Thomas
00:05 Compiling without -g flag kevin_lemay

January 16, 2004
23:26 Re: Problem with CYGACC_CALL_IF_FLASH_CFG_OP Gary Thomas
23:12 Problem with CYGACC_CALL_IF_FLASH_CFG_OP alix t
23:08 jffs2 take a very long time to find a file Philippe Moutarlier
19:57 Re: Porting Problem with stdout Andrew Lunn
19:53 Re: IP adress Get and Set (SIOCSIFADDR problem ? ) Andrew Lunn
19:44 Re: Deferring network initialisation Andrew Lunn
17:39 Re: Questions on ecosconfig Nick Garnett
17:08 Re: Support for Intel 82450EM NIC Gary Thomas
17:05 IP adress Get and Set (SIOCSIFADDR problem ? ) sebastien Couret
16:58 RE: Questions on ecosconfig kevin_lemay
16:48 Re: Questions on ecosconfig Nick Garnett
16:46 Support for Intel 82450EM NIC kevin_lemay
16:31 Re: Questions on ecosconfig Gary Thomas
16:23 Questions on ecosconfig kevin_lemay
15:45 Porting Problem with stdout dries
15:17 Howto get basic STL running Øyvind Harboe
11:12 Deferring network initialisation Robin Randhawa
09:44 net phy Bier Meister
08:58 Re: Deferring network initialisation Andrew Lunn
07:25 Deferring network initialisation robin_singh

January 15, 2004
12:13 Re: Re: Timer mechanism Savin Zlobec
11:58 Re: Re: Timer mechanism Giovanni Perbellini
11:55 Re: Re: Timer mechanism Giovanni Perbellini
08:59 Re: gdb:stepi/continue problem Yoshinori Sato
07:44 Re: SV: Gigabit Ethernet throughput on XScale Eric Doenges

January 14, 2004
23:40 eCos WiFi Sébastien Taylor
20:10 Re: SV: Gigabit Ethernet throughput on XScale John Newlin
18:41 Re: Need help building RedBoot for Xilinx ML300 board Bart Veer
15:20 Re: Re: Timer mechanism Gary Thomas
13:47 Re: Re: Timer mechanism Savin Zlobec
13:33 Re: Re: Timer mechanism Giovanni Perbellini
13:09 Re: Timer mechanism Savin Zlobec
06:10 gdb:stepi/continue problem Ganeshan
06:04 Re: gdb:stepi/continue problem Ganeshan

January 13, 2004
17:39 Re: Adding a 82544 driver Package to redboot G.Muruganandam
16:22 Timer mechanism Giovanni Perbellini
13:46 Re: SV: Gigabit Ethernet throughput on XScale Eric Doenges
11:26 Re: Will gcc3.3 will work with eCos?. Bart Veer
09:49 Re: SV: Gigabit Ethernet throughput on XScale Andrew Lunn
08:58 SV: Gigabit Ethernet throughput on XScale Lars.I.Nilsson
08:29 Re: Gigabit Eternet throughput on XScale Andrew Lunn
08:14 Gigabit Eternet throughput on XScale Lars.I.Nilsson
04:28 Re: Will gcc3.3 will work with eCos?. radhakrishnan R

January 12, 2004
22:39 ecos/redboot cdb89712 Sébastien Taylor
19:50 Re: Problems building redboot Bart Veer
18:48 Problems building redboot Eduardo Sabaj
16:28 Re: Will gcc3.3 will work with eCos?. Bart Veer
13:46 ECOS-Port for the Philipps LPC-2106 ? Thomas Schrein
09:20 ecos-port for xilinx virtex2 with powerpc405 Andreas Friedl

January 11, 2004
17:01 网上赚钱不是梦 天地无用
17:01 RE: configtool annoyance (cygwin) Richardson, Anthony
14:54 Re: configtool annoyance (cygwin) Andrew Lunn
13:49 configtool annoyance (cygwin) Richardson, Anthony
13:03 Re: gdb:stepi/continue problem Heiko Panther
09:22 Re: conflict between winsock2.h and socket.h John Dallaway

January 10, 2004
14:42 Re: returning to RedBoot after executing ecos application Mark Salter
10:20 returning to RedBoot after executing ecos application John Stone

January 09, 2004
21:59 Need help building RedBoot for Xilinx ML300 board Mike Wellington
16:12 RE : RE : RedBoot crash after do_go() David POUTY
15:55 RE : RedBoot crash after do_go() nprasad3
13:23 Inode reference counting wrong for jffs2 Thomas Koeller
09:28 RE : RE : RedBoot crash after do_go() David POUTY
09:10 RE: Will gcc3.3 will work with eCos?. Koeller, T.
08:27 Re: bsp_connect function in packages/net/bsd_tcpip/current/src/sys/kern/sockio.c improvement proposal Andrew Lunn
08:12 Re: Will gcc3.3 will work with eCos?. Fredrik Hederstierna
06:41 RE: Will gcc3.3 will work with eCos?. Sanjiv Gupta
06:24 RE: Will gcc3.3 will work with eCos?. Satish Kumar
06:02 Will gcc3.3 will work with eCos?. radhakrishnan R

January 08, 2004
17:56 Re: problem with cyg_thread_release Christoph Csebits
17:51 Re: New User: Linux Synth Help Andrew Lunn
17:44 Re: RE : RedBoot crash after do_go() nprasad3
17:42 Re: problem with cyg_thread_release Andrew Lunn
16:54 RE : RedBoot crash after do_go() David POUTY
15:56 New User: Linux Synth Help Richardson, Anthony
15:42 problem with cyg_thread_release Christoph Csebits
14:29 Altera NIOS port Paul C
12:20 Re: Memory pools? Savin Zlobec
01:58 Memory pools? John Newlin

January 07, 2004
20:01 Re: MAC (ESA) address with Redboot's fconfig-tool Gary Thomas
18:55 MAC (ESA) address with Redboot's fconfig-tool Philip Soeberg
18:30 Re: MPC860: quicc_smc_serial driver *issue* Gary Thomas
18:22 MPC860: quicc_smc_serial driver *issue* nprasad3
17:37 Re: RedBoot crash after do_go() Gary Thomas
17:32 RedBoot crash after do_go() David POUTY
15:35 Re: meant of string "target sim ..." Gary Thomas
14:50 meant of string "target sim ..." Luca Formaggio
13:48 Re: gdb:stepi/continue problem Yoshinori Sato
11:06 Re: EB 40A, Serial driver stops after 10 minutes Shiv Subramaniam
08:12 Re: FOSDEM David N. Welton
08:01 Re: FOSDEM Chris Gray
00:06 Re: FOSDEM Alex Schuilenburg

January 06, 2004
23:12 Need help with serially-aligned multi-device flash. Louis Gagne
21:46 MPC860 - [printf, diag_printf] on SCC1 nprasad3
19:33 FOSDEM David N. Welton
17:28 Re: structure size Bart Veer
17:05 RE: structure size Olaf Peters
17:04 Re: structure size Roland Caßebohm
16:27 Re: Porting eCos on Intel XScale PXA255 amassa at san dot rr dot com
16:24 Re: Porting eCos on Intel XScale PXA255 amassa at san dot rr dot com
16:17 Re: linking problem Bart Veer
16:10 Re: structure size Grant Edwards
15:55 Re: structure size Grant Edwards
15:36 Re: structure size Bart Veer
15:15 Re: structure size Grant Edwards
11:40 Re: structure size Bart Veer
10:20 Problems with compiling a new redboot for nec v850 sa1 R.Y. Grootkop
07:34 gdb:stepi/continue problem Ganeshan
04:06 Re: Adding a 82544 driver Package to redboot G.Muruganandam
01:07 Re: Porting eCos on Intel XScale PXA255 Vinayagam
00:08 RE: Valgrind - A Heads Up. John Carter
00:06 Re: run-mode debugging with eCos and GDB? Alex Schuilenburg

January 05, 2004
23:55 Re: EB 40A, Serial driver stops after 10 minutes Daniel Néri
23:25 run-mode debugging with eCos and GDB? Chris Wein
22:55 RE: Valgrind - A Heads Up. Dirk Broer
22:43 Re: structure size Grant Edwards
22:33 Re: structure size Chris Gray
22:29 Re: EB 40A, Serial driver stops after 10 minutes Thomas Koeller
20:44 EB 40A, Serial driver stops after 10 minutes Shiv Subramaniam
20:21 Valgrind - A Heads Up. John Carter
16:06 Re: structure size Grant Edwards
15:05 Re: structure size Bart Veer
13:06 RE: MPC860 - devs/serial/quicc Gary Thomas
12:53 Re: Adding a 82544 driver Package to redboot Andrew Lunn
12:46 Re: __pci_window Andrew Lunn
10:45 RE: MPC860 - devs/serial/quicc Philip Soeberg
10:35 Re: linking problem Ganeshan
10:08 Thread stack overflow checking problem for H8S architecture Uwe Kindler
08:22 Re: structure size William Martin
04:22 Re: structure size Gary Thomas
03:30 structure size Aravind B

January 04, 2004
21:23 conflict between winsock2.h and socket.h Kevin Lin

January 03, 2004
19:54 Re: Adding a 82544 driver Package to redboot G.Muruganandam

January 02, 2004
20:16 __pci_window Leandro Fanzone
17:52 Re: linking problem Bart Veer
16:17 Re: JFFS2 Gary Thomas
16:17 Re: MPC860 - devs/serial/quicc Gary Thomas
16:11 MPC860 - devs/serial/quicc nprasad3
15:47 JFFS2 Eduardo Sabaj

January 01, 2004
10:12 RTC query Romil Shah


Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:

Mail converted by MHonArc 2.6.3