This is the mail archive of the
mailing list for the eCos project.
Re: X86 port
- From: Jonathan Larmour <jifl at eCosCentric dot com>
- To: baljeet singh <baljeet45 at yahoo dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Mon, 23 Feb 2004 03:18:26 +0000
- Subject: Re: [ECOS] X86 port
- References: <email@example.com>
baljeet singh wrote:
I have created the X86 (PC) target system with
ecos2.0. One of the serial ports on the target
platform is being used as diagnostic port for
downloading the code etc. using Redboot and other
diagnostic messages. I would like to use the other
port of the target PC for connecting to a Hyper
terminal to send data to the target board and send
some responses back to test the serial port functions
of the target board.
Besides writing a test code to get/send data to the
serial port, do I need to make any entries to DEVTAB
or this is already done when the library is built.
How do I proceed with this?
Try changing CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL to 1 in your eCos
eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
>>>>> Visit us in booth 2527 at the Embedded Systems Conference 2004 <<<<<
March 30 - April 1, San Francisco http://www.esconline.com/electronicaUSA/
--["No sense being pessimistic, it wouldn't work anyway"]-- Opinions==mine
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss