This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: deploying production systems using RedBoot as a bootloader
- From: agyhoo <agyhoo at yahoo dot com>
- To: Grant Edwards <grante at visi dot com>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Thu, 4 Mar 2004 09:30:15 -0800 (PST)
- Subject: Re: [ECOS] deploying production systems using RedBoot as a bootloader
Thanks for your response. Do you use the RedBoot 'fis'
commands for doing field updates?
You mentioned that you added 2 new protocols to use
in place of the redboot cli. Are these protocols
used to allow an administrator something other
than a serial/telnet interface (like maybe a GUI
running on a PC)?
- Anunoy
--- Grant Edwards <grante@visi.com> wrote:
>
> > I was wondering if anyone uses RedBoot as their
> bootloader in
> > their production systems to load/update their
> application code
> > images?
>
> Yes.
>
> > If so, do you modify the code to customize the
> > command set/prompt etc.?
>
> Yes. We added a line or two at start up with the product
> name,
> model number, etc. We also added probably a dozen or so
> commands that can be used to configure and test portions
> of the
> product.
>
> In addition to that, we added support for two additional
> network protocol that can be used to administer the
> product in
> place of the RedBoot command-line stuff.
>
> --
> Grant Edwards
> grante@visi.com
__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you?re looking for faster
http://search.yahoo.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss