[ECOS] Change IP during run-time...again

["Daniel Lidsten" <Daniel dot Lidsten at combitechsystems dot com>]

Hi,

I have tried to do change the IP using init_net instead of ioctl.

When i startup my board then it has a predefined IP: 192.168.0.1. I then
try to change it with the below code. However, the strange thing is that
when i am sending data then the source address of all packages are set
to the old address, after i have made the init_net call. How come?

Have i missed some init call that has to be executed for these changes
to take effect?

Regards, Daniel Lidsten

-----------

const char  *eth0_name = "eth0";
const char  *eth0_ipaddr = "192.168.0.10";
const char  *eth0_netmask = "255.255.255.0";
const char  *eth0_broadcast = "192.168.0.255";
const char  *eth0_gateway = "192.168.0.254";
const char  *eth0_server = "192.168.0.30";

//Create new socket and send UDP data on port 1000
SendUDPdata(1000);

build_bootp_record(&eth0_bootp_data,
                   eth0_name,
                   eth0_ipaddr,
                   eth0_netmask,
                   eth0_broadcast,
                   eth0_gateway,
                   eth0_server );

if (!init_net(eth0_name, &eth0_bootp_data)) 
   printf("Network initialization failed for eth0\n");
         
//Create new socket and send UDP data on port 2000
SendUDPdata(2000);

-----------

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss