RE: [ECOS] redboot & EB55

[Alan Bowman <ABowman at synaptics-uk dot com>]

Did you remember to switch the boot jumper (JP1, I think) to run from the alternative boot area?  If you wrote redboot_ROM to run from the USER flash area (0x01100000 when you have boot from Angel in the STD area) then you will need to move this jumper.

I have run redboot on the EB55 perfectly well, following the documentation for the board at http://ecos.sourceware.org/ecos/docs-latest/ref/at91.html (I presume that this is the user guide you refer to).

Hope this helps

Alan Bowman

-----Original Message-----
From: Michael Jastrebtsoff [mailto:jam2000@pisem.net]
Sent: 31 March 2004 05:54
To: ecos-discuss@sources.redhat.com
Subject: [ECOS] redboot & EB55


Hello, All.

I've got a issue with running RedBoot-ROM in EB55.
I did all steps described in RedBoot Guide(for EB55):
  1. Run Angel via GDB
  2. Download redboot-RAM
  3. get connected to redboot via terminal and download redboot-ROM
     image. then I have wrote redboot-ROM firmware to the EB55.

In case of connection to EB55 nothing goes on. Angel runs as usual.

Old anyone successed in running redboot-ROM in EB55?


-- 
Regards,
 Michael                          


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss