This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: GDB mystery sort of solved
- From: "Gary Thomas" <gary at mlbassoc dot com>
- To: "Chuck McManis" <ecos at mcmanis dot com>
- Cc: "ECOS Discussion Group" <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 1 Apr 2004 22:41:47 -0700 (MST)
- Subject: Re: [ECOS] GDB mystery sort of solved
- References: <6.0.0.22.2.20040401213622.02feddc0@66.125.189.29>
Chuck McManis said:
> I suspect something in GDB is trying to change the baud rate
> when debugging. I've done everything I can think of to tell it not too
> change it, but when I use gdb over the network directly to the box it works
> (something I was hoping to avoid as it makes outside the firewall debugging
> that much harder).
GDB (nor eCos) will no change the debug channel baud rate on the fly.
In GDB, you can adjust this before making the connection via "set remotebaud XXX"
Can you elaborate on what you are seeing?
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss