This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Problems with JTAG: ARM7TDMI, Multi-ICE, gdb
- From: "Robert Cragie" <rcc at jennic dot com>
- To: "Heiko Panther" <heiko dot panther at web dot de>, <ecos-discuss at sources dot redhat dot com>
- Date: Wed, 5 May 2004 17:42:23 +0100
- Subject: RE: [ECOS] Problems with JTAG: ARM7TDMI, Multi-ICE, gdb
I have used an EPI JEENI successfully with GDB. There used to be issues
using Multi-ICE (see mailing list archive) and I'm not sure how well these
have been cleared up.
Robert Cragie, Design Engineer
_______________________________________________________________
Jennic Ltd, Furnival Street, Sheffield, S1 4QT, UK
http://www.jennic.com Tel: +44 (0) 114 281 2655
_______________________________________________________________
> -----Original Message-----
> From: ecos-discuss-owner@ecos.sourceware.org
> [mailto:ecos-discuss-owner@ecos.sourceware.org]On Behalf Of Heiko
> Panther
> Sent: 05 May 2004 15:21
> To: ecos-discuss@sources.redhat.com
> Subject: [ECOS] Problems with JTAG: ARM7TDMI, Multi-ICE, gdb
>
>
> I set up my system with them Multi-ICE Server 2.2.5 and
> multi-ice-gdb-server, and downloading the binary works fine.
> Breakpoints work too, but only on the first run after resetting the board.
> Single stepping does not work in most places, the processor will
> just run until the next breakpoint.
>
> Can anyone help with this? Also, are there alternatives I should
> consider to debug my ARM?
>
> Thanks!
> Heiko Panther
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss