This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Redboot: FLASH problem
Guys,
What was the problem? Don't forget contributing back in case you had to
fix errors.
Thanks,
Bob
On Thu, 2004-05-27 at 19:56, Gary Thomas wrote:
> On Thu, 2004-05-27 at 11:51, Miguel Josue Vega wrote:
> > Hi everyone,
> >
> > We finally got a redboot ROM start-up on our CME555 board. Thank you very
> > much to all that gave advice and suggestions.
> >
> > Now we are running into a problem with redboot recognizing FLASH.
> > We get the following message at start-up:
> >
> > +FLASH: driver init failed: Driver does not support device
> > Sorry, FLASH config exceeds available space in FIS directory
> >
> > RedBoot(tm) bootstrap and debug environment[ROM]
> > Non-certified release, version CME555/MPC555 ROM-Startup - built 14:41:08,
> > May 26 2004
> >
> > Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
> >
> > RAM: 0x00400000-0x0047ffff, [0x004055c0-0x00470fff] available
> > FLASH: 0x00000000 - 0x00000001, 0 blocks of 0x00000000 bytes each.
> > RedBoot>
> >
> > Has anyone gotten a similar message before? Or does anyone have an idea
> > what could cause this?
>
> What FLASH chip is RedBoot supposed to recognize?
> What device have you configured in?
>
> This error means that the FLASH driver was called and when it did a
> "query" on the physical device, it could not determine the device
> [model] from the list of devices that it supports.
>
> Your problem may just be one of configuration or you might have to add
> new FLASH device support for your particular board.
>
> --
> Gary Thomas <gary@mlbassoc.com>
> MLB Associates
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss